Table of Contents
Advertisement
Quick Links
PORTABLE REBAR CUTTER
ITEM: 61084 900W / 61085 1350W
OWNER'S MANUAL AND SAFETY INSTRUCTIONS
SAVE THIS MANUAL: KEEP THIS MANUAL FOR SAFETY WARNINGS, PRECAUTIONS, ASSEMBLY,
OPERATING, INSPECTION, MAINTENANCE AND CLEANING PROCEDURES. WRITE THE PRODUCT'S
SERIAL NUMBER ON THE BACK OF THE MANUAL NEAR THE ASSEMBLY DIAGRAM (OR MONTH
AND YEAR OF PURCHASE IF PRODUCT HAS NO NUMBER)
FOR QUESTIONS PLEASE CALL OUR CUSTOMER SUPPORT: (909) 628 0880 MON-FRI 9AM TO 3PM PST
Advertisement
Table of Contents
Summary of Contents for Xtreme Power 61084
- Page 1 PORTABLE REBAR CUTTER ITEM: 61084 900W / 61085 1350W OWNER’S MANUAL AND SAFETY INSTRUCTIONS SAVE THIS MANUAL: KEEP THIS MANUAL FOR SAFETY WARNINGS, PRECAUTIONS, ASSEMBLY, OPERATING, INSPECTION, MAINTENANCE AND CLEANING PROCEDURES. WRITE THE PRODUCT’S SERIAL NUMBER ON THE BACK OF THE MANUAL NEAR THE ASSEMBLY DIAGRAM (OR MONTH...
-
Page 2: Important Safety Information
IMPORTANT SAFETY INFORMATION GENERAL SAFETY WARNINGS Read all safety warnings and instructions. Failure to follow the warnings and instructions may result in electric shock, fire and/or serious injury. Save all warnings and instructions for future reference. The warnings, precautions, and instructions discussed in this instruction manual cannot cover all possible conditions and situations that may occur. -
Page 3: Specifications
PRE-OPERATION SPECIFICATIONS OPERATION Pre-use checks 1. Check oil level. 2. Check condition of cutter blocks and tightness of cutter block bolts. Caution: Using loose or cracked cutter blocks may result in injury to operators as well as damage to unit. 3. - Page 4 OPERATION / MAINTENANCE The correct position during cutting and must be properly set for each rebar before making a cut. Screw in stopper to provide sufficient clearance for rebar. Insert rebar fully into U-shaped support. Make sure that rebar is resting on the base of the stopper. Keeping rebar at right angels (90 °) to front cutter block, screw out the stopper until it is just touching the rebar.
-
Page 5: Maintenance
MAINTENANCE OIL LEVEL CHECK The cutters are hydraulically operated, the oil level must be checked at frequent intervals, preferably every day. Failure to maintain the oil at the proper level results in a drop in pressure and loss of cutting power. Caution: Hydraulic oil is highly flammable. - Page 6 PARTS INFORMATION 61084...
- Page 7 PARTS LIST...
- Page 8 PARTS INFORMATION 61085...
- Page 9 PARTS LIST...
-
Page 10: Please Read The Following Carefully
OF NOTE PLEASE READ THE FOLLOWING CAREFULLY THE MANUFACTURER AND/OR DISTRIBUTOR HAS PROVIDED THE PARTS LIST AND ASSEMBLY DIAGRAM IN THIS MANUAL AS A REFERENCE TOOL ONLY. NEITHER THE MANUFACTURER OR DISTRIBUTOR MAKES ANY REPRESENTATION OR WARRANTY OF ANY KIND TO THE BUYER THAT HE OR SHE IS QUALIFIED TO MAKE ANY REPAIRS TO THE PRODUCT, OR THAT HE OR SHE IS QUALIFIED TO REPLACE ANY PARTS OF THE PRODUCT.
Need help?
Do you have a question about the 61084 and is the answer not in the manual?
Questions and answers