Rompa Mini Talking Cube Manual

Advertisement

Quick Links

1.

Product Name

Mini Talking Cube
2.

Product Code

20402
3.

Colour

As shown
4.

Brief Description

All the fabulous Wi Fi features of the Talking Cube - on a smaller scale!
Talks, activates and allows your own recordings.
No programming required - plug and play!
Perfect for little hands.
Includes cube with zipped cover, speaker and 9V battery.
5.

Contents

1 x
Mini Talking Cube
1 x
Transmitter module to fit inside Mini Talking Cube (with PP3 9v battery)
1 x
Control box (receiver; white unit; may be found inside the cube)
1 x
Power supply

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Mini Talking Cube and is the answer not in the manual?

Questions and answers

Summary of Contents for Rompa Mini Talking Cube

  • Page 1 Perfect for little hands. Includes cube with zipped cover, speaker and 9V battery. Contents Mini Talking Cube Transmitter module to fit inside Mini Talking Cube (with PP3 9v battery) Control box (receiver; white unit; may be found inside the cube) Power supply...
  • Page 2 Best Use Use indoors with Wi Fi responsive products. Compatible ROMPA® Products ROMPA® offers a large range of Wi Fi responsive products - the range is continually growing – please see our catalogue and website – www.rompa.com. Some compatible products include: 20848, 21098 Sensory Magic™...
  • Page 3 Make sure the switch on the cube itself is ON. It is switched ON when the switch shows RED. The Mini Talking Cube is supplied with a pre-recorded message on each side. To change this recording, place the cube so that the side you wish to associate a message to is facing upwards.
  • Page 4 3. Turn ON the switch in the Cube itself. It is switched ON when the switch shows red. 4. Throw the Mini Talking Cube. The recording of the uppermost side will be activated. 5. Vary activities by using the transparent pockets on the sides to hold images, photographs, words etc (not included).
  • Page 5  Perfect for little hands. Compatible with an ever-growing number of ROMPA® products - wall panels, bubble tubes and Light Source to name just a few! This product does not require internet access. It is supplied complete and will work...
  • Page 6 11. Safety  Clear a suitable space.  Do not throw at people or objects.  The power supply is for indoor use only.  Check all hardware and stitching before each use to check these are intact.  12. Technical Specification Battery life: Continuous use (24hrs/day) approx 4 days.
  • Page 7 Do not attempt to access the interior of this box. Push the grey box back into the Mini Talking Cube and close the zip. Make sure the grey box is put back in the correct way round – coloured stickers indicate the correct orientation.
  • Page 8 8. Switch off for 30 seconds minimum and then start up again. This will allow the product to reset itself. Further copies of these instructions can be downloaded at www.rompa.com We hope you find our instructions invaluable. If you have any suggestions for improving them further your comments will be greatly received –...

This manual is also suitable for:

20402

Table of Contents