Smarte mute+ Instructions

HOW TO USE

1
Slide the ON/DEMO/OFF Switch
to the ON position.
MUTE:
The smart home device can be muted by setting the TIMER in 10 minute increments up to a total of 60 minutes at a time.
To set the TIMER:
3
-1
Release CENTER BUTTON when desired time is achieved. The TIMER will begin. After each 10 minutes have elapsed, an LED will turn
off. At the completion of the program, the LEDs will blink rapidly 3 times. The LEDs and the internal mechanism will turn off.
4
Thank you for your purchase! Smarte™ Mute ™ proprietary technology helps block
any voice or noise, near or far, from your smart speaker microphones. This enhances
your smart speaker experience by providing an extra level of trusted privacy and
peace of mind.
The Mute ™ works with Amazon Echo, Echo Plus, and Echo Dot smart speakers.
I N S T R U C T I O N S
2
Place Mute
Amazon Echo, Echo Plus, or
Echo Dot smart speaker.
LED ON
Press the CENTER BUTTON
and hold.
UNMUTE:
At any time,
user may stop Mute
™
by tapping the center
button. The LEDs will
blink rapidly 3 times.
The LEDs and the internal
mechanism will turn off.
™ on either the
CLEAR WINDOW/RING
Clear window/ring at bottom of Mute
should nest outside and directly on top
of smart speaker (microphone side up).
The Amazon Echo lighting responses
are still visible to the user through the
clear window.
3
-2
Keep holding the CENTER
BUTTON to add 10 additional
minutes.
5
SIDE VIEW
™
ALL LEDs ON
When not using the
Mute for extended
™
periods of time, it is
suggested to move the
ON/DEMO/OFF Switch to
the OFF positon.