Advertisement
Charging an NXT-BP using the NXT-CHG
1.
Provide power to the charger.
2.
Align the Battery connector with the corresponding charge slot within
each of the two NXT-CHG slots (FIG. 4).
FIG. 4
Battery installation procedure
3.
Firmly insert the battery into the desired slot until the battery is both
securely located within the slot and there is activity from the
corresponding Slot LED. Refer to the previous section for LED
information.
AMX Corporation reserves the right to alter specifications without notice at any time.
For full warranty information, refer to the AMX Instruction Manual(s) associated with your Product(s).
AMX Corporation. All rights reserved. The AMX logo is a trademark of AMX Corporation. AMX reserves the right to alter specifications without notice at any time.
3000 RESEARCH DRIVE, RICHARDSON, TX 75082 • 800.222.0193 • fax 469.624.7153 • technical support 800.932.6993 • www.amx.com
NXT-BP Modero Power Pack
NXT-CHG Modero Power Station
036-004-2688 4/06 ©2006
Using the NXT-CHG Recalibration Pushbutton
The recalibration process increases the accuracy of the battery charge
level.
A microprocessor controls all functions of the charger so that sequencing
and adjustment of charge parameters occur automatically without user
intervention.
1.
Place the battery (selected for recalibration) securely into Slot 1
(left slot) until there is activity from the corresponding LED.
2.
Push the button located between the two bays to initiate recalibration
in the left bay only.
ATTENTION!
Recalibration of the batteries is only done upon request from the Modero
on-screen Battery Base page.
REV: D
93-2255-10
Advertisement
