Do you have a question about the SHE16476B and is the answer not in the manual?
Questions and answers
Summary of Contents for Seville Classics SHE16476B
Page 1
5-Tier Steel Wire Wine Rack Model: SHE16476B Thank you for choosing Seville Classics! We hope that you enjoy your new wine rack. Please read through this user guide for parts list, assembly instructions, frequently asked questions and contact information. 082020...
Page 2
Parts List G. Slip sleeves (40) A. Shelf (5) H. Caps (4) B. Lower poles (4) I. Connector (4) C. Upper poles (4) J. Feet (4) D. Brace (8) K. Long screw (4) E. Wall strap (2) L. Short screw (4) F.
Page 3
Assembly Instructions Step 1. Screw FEET (J) into bottoms of LOWER POLES (B). Step 2. Fit SLIP SLEEVES (G) around lowest grooves on poles until click is felt. TIP: Make sure arrows on SLIP SLEEVES (G) point upward. Slide SHELF (A) over slip sleeves. Press down until secure.
Page 4
Step 4. Hook BRACES (D) from the top and middle shelves through CLIPS (F) on lower shelves. Loop the WALL STRAPS (E) around the back top shelf. Use a pencil to mark the installation points for the screws and anchors through the holes in each strap.
Need help?
Do you have a question about the SHE16476B and is the answer not in the manual?
Questions and answers