ambiance HC-669 Installation And Safety Instructions

INSTALLATION AND SAFETY INSTRUCTIONS HC-669
INSTRUCTIONS FOR INSTALLATION OF THE
AMBIANCE ® TRANSFORMER
WARNING: Be sure the electricity to the wires you are
working on is shut off; either the fuse removed or the circuit
breaker off.
This plug in electronic transformer has (2) Class
(each 60w max), for this transformer to operate the wattage
load must be a minimum of 15w, but must not exceed 60w on
each output.
FOR PROPER OPERATION OF AN ELECTRONIC
TRANSFORMER, THE WATTAGE LOAD MUST FALL
WITHIN THE SPECIFIED RANGE. IF THE LOAD DOES NOT
FALL WITHIN THIS RANGE, THE TRANSFORMER MAY
MALFUNCTION OR LAMPS MIGHT FLICKER.

TRANSFORMER INSTALLATION

Select the desired location to mount the transformer (not in
contact with insulation & away from oven or any other source
of intense heat). Using the two screws (provided), fasten the
transformer and mounting tab to the mounting
surface.
SCREW
PART A
120V SWITCH
TRANSFORMER
DISC LIGHT
PLUG
II
outputs
120V
CORD
NUT
FIGURE 3
120V TRANSFORMER
PLUG OUTLET
INPUT
DISC
LIGHT
FIGURE 4
(IF APPLICABLE - CONNECT
SECOND PLUG TO LIGHTS)
120 WATTS
(2 x 60 WATT)
TRANSFORMER
THE INPUT/OUTPUT VOLTAGE IS
MARKED ON THE TRANSFORMER
NON-TRACER WIRE
120V
CORD
TRACER WIRE
120V
QUICK-CONNECT PLUG
HC-669
073002
www.SeaGullLighting.com
U.S. PAT. # 5,465,199
TO PLUG (TO LIGHTS)
12V
120V
FROM 120V PLUG
FIGURE 1
COVER
FIGURE 2