Beko HTV8736XS-IT User Manual page 82

• Follow the steps in the HomeWhiz
Setup (5.21.1 HomeWhiz Setup)
to complete the setup.
A
WARNING!
• Since the HomeWhiz and Remote Control
functions of your product work through
pairing via Bluetooth, the product can be
run by only one HomeWhiz app at a time.
5.21.3 Using the Remote
Control function
After HomeWhiz setup, Bluetooth will turn on
automatically. To enable or disable the Bluetooth
connection, please see 5.11.2 Bluetooth 3".
If you switch your machine off and on
while Bluetooth is enabled, it will reconnect
automatically. If the paired device goes out of
the range, the Bluetooth connection will turn off
automatically. For this reason, you will need to
turn on Bluetooth again if you want to use the
Remote Control function.
You can check the Bluetooth symbol on the
display to follow the connection status. If the
symbol is on, this means that the Bluetooth
connection is established. If the symbol is
established, the product is trying to connect. If
the symbol is off, this means that you have no
connection.
A
WARNING!
• If the Bluetooth connection is enabled on your
product, you can select the Remote Control
function. If the Remote Control function
cannot be selected, check the connection
status. If the connection fails, repeat the initial
set-up settings on the appliance.
• For safety reasons, the product's door will
remain locked while the Remote Control
function is enabled, independently of the
operating mode. If you want to open the
door of the product, you will need to turn
the programme selection knob or press the
Remote Control key to disable the Remote
Control function.
If you want to control your washing machine
remotely, enable the Remote Control function
by pressing the Remote Control button while
the programme knob is in the Programme
Download/Remote Control position on the
control panel. Once the product is accessed,
you will see a screen similar to the one below.
82 / EN
When Remote Control is enabled, you can only
manage and switch off the machine and follow
status on the washing machine. All functions
except child lock can be managed through the
application.
You can check the function indicator on the key
to follow whether the Remote Control function is
On or Off.
If the Remote Control function is Off, all the
operations are handled on the washing machine
and only status follow-up is allowed on the
application.
If the Remote Control function cannot be
enabled, you will hear a warning after pressing
the button. This might occur if the product is
switched on or if there is no product paired
through Bluetooth. Bluetooth setting being Off
or the washing machine's door being open are
examples for such cases.
When you enable this function on the washing
machine, said function will remain on except
for certain cases, allowing you to control your
washing machine remotely via Bluetooth.
In certain cases, it deactivates itself for
safety reasons:
• When your washing machine
undergoes a power interruption.
• When the programme knob is turned
to select a different programme or
when the product is switched off.
5.21.4 Troubleshooting
Follow the steps below if you are having problem
with controlling or connection. Observe whether
the problem persists or not after the action you
have performed. Do the following if the problem
is not resolved.
• Check whether your smart device is
connected to the relevant home network.
• Restart the product application.
• Turn Bluetooth off and on through
the user control panel.
• If the connection cannot be established
with the above processes, repeat the initial
set-up settings on the washing machine.
If the problem persists, consult an
Authorised Service Agent.
Washer-Dryer / User Manual