Table of Contents
Advertisement
Advertisement
Table of Contents
Summary of Contents for Stryker SDP1000
- Page 1 SDP1000 Digital Color Printer User Guide 0240080230 4-196-299-07 (1)
-
Page 2: Table Of Contents
Table of Contents Warnings and Cautions ..................3 Product Description/Intended Use ..............5 Indications/Contraindications ........................ 5 System Configuration ........................... 5 Location and Function of Parts and Controls ..........5 Front ..............................5 Rear ..............................6 Carrying the printer ..................... 7 Connections ...................... -
Page 3: Warnings And Cautions
Follow the directions in the instructions for use for parts of the unit on which this symbol The Stryker Standard Warranty and Return Policy is void appears. if any of these warnings are disregarded. This symbol indicates the manufacturer, and For the customers in the U.S.A. - Page 4 If you have questions on the use of the above Power Cord connects additional equipment to the signal input part / Appliance Connector / Plug, please consult a Stryker or signal output part configures a medical system, and service technician.
-
Page 5: Product Description/Intended Use
The SDP1000 Stryker Digital Color Printer, REF 0240080230, is a dye sublimation thermal transfer printer providing high quality and high resolution printing of Stryker Digital Capture Device image data on A4 or letter size paper in full color (256 gradations process and 16.7 million colors). -
Page 6: Rear
G Indicators Rear The indicators are as shown below: A TRAY LOCK indicator Lights when the media tray cannot be pulled out. B RIBBON/PAPER indicator Lights when an error involving the ink ribbon or paper occurs. Also, flashes while cleaning is in progress. USB connector C ALARM indicator Connects to a computer equipped with a USB... -
Page 7: Carrying The Printer
Preparation Connections After connecting a USB connecting cable to the printer and the Stryker Digital Capture Device, connect the power cord. Carrying the printer Hold both sides of the printer as shown below when USB Port Connection carrying the printer. - Page 8 Securing the USB cable After you connect the USB cable to the printer, it is recommended that you use the cable stopper to secure the USB cable to prevent it from being accidentally disconnected. Notes • Make sure that the USB cable is connected securely at both ends.
-
Page 9: Before Printing
If you open the wrapping holding it with hands or placing it horizontally, you may drop it. Once the printer is connected to the Stryker Digital Dropping may result in an injury. Capture Device (page 7) and before initiating printing, the •... -
Page 10: Loading The Ink Ribbon And Paper
Separate the two spools of the ink ribbon. Loading the Ink Ribbon and Paper When using the printer for the first time, it is necessary to first load the paper and ink ribbon. CAUTION Do not touch any unit circuitry and the patient at the same time. - Page 11 The selector settings and paper rolls correspond as If the paper holder selector comes off follows. The selector could come off if you drop the blue paper • LT (letter size): SEPC-110 holder. Follow the procedure described below to • A4 (A4 size): SEPC-100 reattach the selector to the paper holder.
- Page 12 2 Place the paper roll in the media tray so that the Note arrow on the label points toward the ink ribbon side. You can load the paper roll in the correct Be certain to remove the labels completely. If the direction by matching the colors of the paper labels are not peeled off carefully, they can leave holders inserted into the paper roll with the colors...
-
Page 13: Replacing The Ink Ribbon And Paper
the thermal head could result in a burn. Also, be Leading edge of paper careful not to scratch the thermal head. Open the cover of the media tray and remove the paper roll. Remove the paper holders from the paper roll. Leading edge of paper If the ink ribbon becomes torn while still in use Cellophane tape, etc., can be used to repair a torn ink... -
Page 14: Printing
PRINT, ALARM, RIBBON/PAPER, and TRAY Before printing LOCK indicators all light simultaneously. In such • Is the printer connected to a Stryker Digital Capture an event, press the 1 On/standby switch once to Device? (page 7) enter the standby state and then press the switch •... - Page 15 When removing and then reloading a partially used paper roll If the paper roll is not tightly rolled, roll it up more tightly before reloading it. Note When removing a partially used paper roll, be sure to place the media tray on a stable surface before beginning. If you drop the media tray while it contains a paper roll, it could cause personal injury.
-
Page 16: Precautions
• If the unit malfunctions or if a foreign body falls into the cleaning. cabinet, disconnect the power immediately and consult Do not sterilize the printer or immerse it in any liquid. your local Stryker representative. Doing so will damage the unit. Installation Cleaning •... -
Page 17: Cleaning The Internals Of The Printer
When cleaning is completed, the paper that was used Cleaning the Internals of the Printer for cleaning is ejected and the TRAY LOCK indicator Perform thermal head cleaning if lines and marks appear is extinguished. on printouts, and perform roller cleaning if scratches appear at regular intervals. - Page 18 • Be sure to use only one cleaning sheet per cleaning Remove the backing paper 1 from the cleaning sheet and attach the cleaning sheet to the partially ejected procedure. Using more than one sheet for a single roller paper, then remove the backing paper 2. cleaning procedure may result in malfunction.
-
Page 19: Ink Ribbon And Paper
When cleaning is completed, the paper is ejected and Ink Ribbon and Paper the TRAY LOCK indicator is extinguished. Notes Self-Laminate Color Printing Pack SEPC-100 • The cleaning sheet is ejected with the paper. Contains two color ink ribbons and two rolls of paper (A4- Discard the paper and do not reuse it. -
Page 20: Technical Specifications
• Promptly load the paper roll into the tray and place into 1 Paper holder (pink) (1): P12811 the printer. 2 Paper holder (Blue) (1): P12812 • This paper roll is specifically designed for the SDP1000 Cleaning Ribbon (1) Stryker Digital Color Printer. Do not use with printers P12814 from other manufacturers. -
Page 21: Troubleshooting
If the problem persists, turn off the • The printer may not have been able to printer and consult with your local Stryker representative. recover from an error. tPress the 1 On/standby switch to... -
Page 22: Explanation Of Indicators
Indicator Status Possible causes and remedies Explanation of Indicators RIBBON/ One of the following causes. PAPER, • The paper roll has run out. tLoad a new ink ribbon and paper The meanings of the indicators on the printer when they ALARM roll (page 13). -
Page 23: If A Paper Jam Occurs
Footnotes for the previous chart: If a Paper Jam Occurs During continuous printing, the PRINT indicator lights at the same time if there are still images remaining. Only the RIBBON/PAPER indicator flashes. The ALARM While the printer is printing, if the ALARM indicator indicator is lit. - Page 24 If there is no printing on the paper Make sure that the leading edge of the paper is not creased or wrinkled. If the leading edge is creased or the paper is wrinkled, cut off the leading edge or wrinkled portion with a pair of scissors or the like.
- Page 25 • The portable and mobile RF communications equipment such as cellular phones can affect the SDP1000. Warning • Portable RF communications equipment should be used no closer than 30 cm (12 inches) to any part of the SDP1000. Otherwise, degradation of the performance of this equipment could result.
- Page 26 Guidance and manufacturer’s declaration - electromagnetic immunity The SDP1000 is intended for use in the electromagnetic environment specified below. The customer or the user of the SDP1000 should assure that it is used in such an environment. IEC 60601 Compliance...
- Page 27 To assess the electromagnetic environment due to fixed RF transmitters, an electromagnetic site survey should be considered. If the measured field strength in the location in which the SDP1000 is used exceeds the applicable RF compliance level above, the SDP1000 should be observed to verify normal operation. If abnormal performance is observed, additional measures may be necessary, such as reorienting or relocating the SDP1000.
- Page 28 Recommended separation distances between portable and mobile RF communications equipment and the SDP1000 The SDP1000 is intended for use in an electromagnetic environment in which radiated RF disturbances are controlled. The customer or the user of the SDP1000 can help prevent electromagnetic interference by maintaining a...
- Page 29 Guidance and manufacturer’s declaration - electromagnetic immunity The SDP1000 is intended for use in an electromagnetic environment in which radiated RF disturbances are controlled. Portable RF communications equipment should be used no closer than 30 cm (12 inches) to any part of the SDP1000.
-
Page 30: Warranty And Return Plolicy
This warranty may not be transferred or assigned without the express written consent of Stryker Endoscopy. If a valid warranty claim is received within the Warranty Period, Stryker will, in its sole discretion: (1) repair the product at no charge, (2) replace the product at no charge with a product that is at least functionally equivalent to the original product, or (3) refund the purchase price of the product. -
Page 31: License
License “The FreeType Project LICENSE” and “The Catharon Open Source LICENSE” software are provided in this unit. We provide this software based on license agreements with their owners of copyright. Based on requests by the owners of copyright of these software applications, we have an obligation to inform you of the following. - Page 32 Produced for: Stryker Endoscopy 5900 Optical Court San Jose, CA 95138 USA 1-800-624-4422 U.S. Patents: www.stryker.com/patents P12706 G 2018/08 Printed in Japan...