Table of Contents
Summary of Contents for albutt LG Series
- Page 1 INSTRUCTION MANUAL PARTS CATALOGUE THE ALBUTT RANGE OF LG LOG GRABS LG055 / LG105 / LG405 / SITEPRO THIS MUST BE USED IN CONJUNCTION WITH ALBUTT’S GENERAL OPERATOR’S MANUAL www.albutt.com | 01242 620 252 | keith@albutt.co.uk...
- Page 2 CONTENTS Certificate….…………………………………………3 Safety Instructions…..…..……………………4-7 Operating Instructions…..…..………..……8 Parts Lists……..………………….………………….9 www.albutt.com | 01242 620 252 | keith@albutt.co.uk...
-
Page 3: Eu Certificate Of Conformity
EC Machinery Directive 2006/42 EC, and the Transposed Harmonised Standards: BS EN 1553 (2000) Alistair Albutt Managing Director www.albutt.com | 01242 620 252 | keith@albutt.co.uk... -
Page 4: Safety Instructions
A SAFE DISTANCE OF AT LEAST 10M MUST BE OBSERVED BY ANYONE WITHIN THE VICINITY OF THE LOG GRAB. We recommend that genuine Albutt bolt on brackets are used on Log Grabs. Any weld on brackets which adversely affect the structure of the product and may invalidate warranty. -
Page 5: Hydraulic Safety
CAUTION Hydraulic oil forced out under pressure can break the skin and cause severe injury. In the event of a hydraulic oil leak stop the tractor flow immediately. DO NOT PUT HANDS NEAR A LEAKING PIPE. www.albutt.com | 01242 620 252 | keith@albutt.co.uk... -
Page 6: General Safety And Accident Prevention Regulations
To ensure stability the Log Grab/Site Pro should be stored in a safe position, supported to prevent it being knocked over. If the implement is to be transported on a trailer then it should be securely attached using suitable restraints. www.albutt.com | 01242 620 252 | keith@albutt.co.uk... -
Page 7: Maintenance
Regularly check all bolts and tighten if necessary. Lubricate the hydraulic cylinder and pivot pin daily before use. Only use clean grease complying to Din51502 Clean all grease nipples and the nozzle of the grease gun before lubrication www.albutt.com | 01242 620 252 | keith@albutt.co.uk... - Page 8 OPERATING INSTRUCTIONS The intended use for the Albutt Log Grab is the safe handling of cut timbers. The Site Pro can also be used for this application. Adhering to the safety instructions included, lower the Log Grab/Site Pro so the base tines are just above the ground.
- Page 9 1.6 SPARE PARTS LG055 www.albutt.com | 01242 620 252 | keith@albutt.co.uk...
- Page 10 1.7 SPARE PARTS LG105 www.albutt.com | 01242 620 252 | keith@albutt.co.uk...
- Page 11 1.8 SPARE PARTS LG405 www.albutt.com | 01242 620 252 | keith@albutt.co.uk...
- Page 12 1.9 SPARE PARTS SITE PRO www.albutt.com | 01242 620 252 | keith@albutt.co.uk...
Need help?
Do you have a question about the LG Series and is the answer not in the manual?
Questions and answers