Advertisement
Quick Links
Thank you for choosing to ride the Banshee Legend. You have chosen one of the
fastest bikes on the planet, and we hope that it inspires confidence on the track,
and puts a big grin on your face.
This manual is designed to be a simple reference for you to help you look after
your frame properly.
Torque specs
Main Pivot (Above BB)
All other linkage pivots
Rear Thru Axle
Rear Thru Axle Lock Nut
Shock Bolt - Frame side (front)
Shock Bolt - Swing Arm (rear)
Derailleur Hanger Bolt
Maintenance schedule
We recommend following this maintenance schedule to ensure optimal performance.
Check bolts are tight
Clean and re-grease pivot assemblies
Bearing replacement
Torque (Nm)
10
8
8
3
12
12
5
Before every ride
Every 50 hours of riding
Every 250 hours of riding
Advertisement
Related Manuals for Banshee Legend 650
Summary of Contents for Banshee Legend 650
- Page 1 Thank you for choosing to ride the Banshee Legend. You have chosen one of the fastest bikes on the planet, and we hope that it inspires confidence on the track, and puts a big grin on your face. This manual is designed to be a simple reference for you to help you look after your frame properly.
- Page 2 If riding in wet or very dusty conditions you should carry out maintenance more regularly as you see fit. Bearing replacement instructions For a complete bearing replacement you will need the following fully sealed bearings: 6001 2RS (for upper link pivots) 6001 2RS (for chainstay pivots) 6202 2RS (for pivot above BB) We only recommend using high quality bearings (SKF, FAG, INA)
- Page 3 1: Stuff a rag under the bottom link to prevent damages to the frame. Remove the shock from the frame using a 6mm Allen key. Then remove the pivot axles using appropriate Allen keys. 2: Remove all the pivot axles from the frame carefully. If the axle is difficult to remove, slide a punch or Allen key into the pivot axle and lightly tap it out.
- Page 4 3: Remove the bearing from the frame with a sliding rail bearing puller. 4: Clean and inspect the frame once the bearings are removed.
- Page 5 Clean and inspect all pivot axles prior to reassembly. If needed, order replacement axles through Banshee or your local dealer. The links can fit very tightly in the frames at times, take time and be gentle when...
- Page 6 6: Lightly grease the pivot axles and reinsert them into the frame. Prepare the axle bolts with blue Loctite. Using appropriate sized Allen keys, tighten the pivot axles to torque etched on the axle / bolt. 7: Apply blue Loctite to shock bolts and reinsert the rear shock.
- Page 7 7: Exploded view + parts list Item No. Part Number Description Qty. 011PCT16010-XL-PA Front Triangle 012PCT16010-PA Rear Triangle 540PCTLEG3-LKT-PA Upper Link 540PCTLEG3-LKB- Lower Link...
- Page 8 Shown DB Air Rear Shock 64075321577-HBLC5 Main Pivot Axle 640752818516-HBL Main Pivot Axle Bolt 64075261279-HBL Axle (Seat stay, Chainstay, Seat Tube) 550PCTLEG2-AS-HB Driveside Compression Washer 600LI616TI Compression Washer Bolt 600SI850ASNIN Shock Bolt M8X50mm 600SI835ASCRN Shock Bolt M8X35mm 620W82121CRC5 Shock washers 63062022RS 6202-2RS Bearing 63060012RS-FAG...
- Page 9 AX150 no part number Axle 150x12mm axle listed no part number rear axle bolt listed 150mm Hanger HNG150 553PCTLEG1- Derailleur Hanger RDH-AN 600SI512SSN-1 Derailleur Hanger Bolt Headset Banshee Munro Taper 44/56 Headset 44/56mm HST56 Spitfire, Rune, Prime, Darkside Legend Warranty...
- Page 10 For the warranty related questions and the most up to date warranty information please go to the Banshee website, or contact Banshee directly.