Advertisement
Brought to You by www.snapwhole.com
Brought to You by www.snapwhole.com
Owner's Manual & Safety Instructions
Save This Manual
operating, inspection, maintenance and cleaning procedures. Write the product's serial number in the
back of the manual near the assembly diagram (or month and year of purchase if product has no number).
Keep this manual and the receipt in a safe and dry place for future reference.
Email our technical support at: productsupport@harborfreight.com
When unpacking, make sure that the product is intact
and undamaged. If any parts are missing or broken,
please call 1-888-866-5797 as soon as possible.
©
Copyright
2014 by Harbor Freight Tools
No portion of this manual or any artwork contained herein may be reproduced in
any shape or form without the express written consent of Harbor Freight Tools.
Diagrams within this manual may not be drawn proportionally. Due to continuing
improvements, actual product may differ slightly from the product described herein.
Tools required for assembly and service may not be included.
Keep this manual for the safety warnings and precautions, assembly,
Visit our website at: http://www.harborfreight.com
®
. All rights reserved.
Read this material before using this product.
Failure to do so can result in serious injury.
SAVE THIS MANUAL.
REV 15f
Advertisement
Summary of Contents for CEN-TECH CAN IBD II
- Page 1 Brought to You by www.snapwhole.com Brought to You by www.snapwhole.com Owner’s Manual & Safety Instructions Save This Manual Keep this manual for the safety warnings and precautions, assembly, operating, inspection, maintenance and cleaning procedures. Write the product’s serial number in the back of the manual near the assembly diagram (or month and year of purchase if product has no number).
-
Page 2: Table Of Contents
Brought to You by www.snapwhole.com Brought to You by www.snapwhole.com Table of Contents Safety ..........3 Operating Instructions ....9 Specifications ......5 Maintenance .......15 Overview........5 Troubleshooting ......15 Setup - Before Use: .....8 Warranty ........16 WARNING SYMBOLS AND DEFINITIONS This is the safety alert symbol. It is used to alert you to potential personal injury hazards. -
Page 3: Safety
Brought to You by www.snapwhole.com Brought to You by www.snapwhole.com Important Safety Information Work Area Safety Keep your work area clean and well lit. 10. Keep bystanders, children and visitors Cluttered benches and dark away while operating the Scan Tool. areas may cause accidents. - Page 4 Brought to You by www.snapwhole.com Brought to You by www.snapwhole.com Personal Safety Wear ANSI-approved safety WARNING: The cord of this product goggles during use. contains lead and/or di (2-ethylhexyl) phthalate (DEHP), chemicals known Do not wear loose clothing or jewelry. to the State of California to cause Keep your hair, clothing, and cancer, and birth defects or other...
-
Page 5: Specifications
Brought to You by www.snapwhole.com Brought to You by www.snapwhole.com Specifications Display Screen Backlit LCD (128 x 64) Operating Temperature 32°F to 140°F Storage Temperature -4°F to 158°F Power 8V to 18V power provided by vehicle battery Overview OBD II On-Board Diagnostics It is required by the EPA that all 1996 and If the light comes on, the vehicle might have newer vehicles sold in the United States be... - Page 6 Brought to You by www.snapwhole.com Brought to You by www.snapwhole.com Definitions • DLC: Data Link Connector • MIL: Malfunction Indicator Lamp The 16-cavity connector on the vehicle The vehicle’s “Check Engine” that allows communication between the warning light that activates computer system and the Scan Tool.
- Page 7 Brought to You by www.snapwhole.com Brought to You by www.snapwhole.com Diagnostic Trouble Code A five digit alphanumeric identifier for a fault condition identified by the OBD II system. There are three types of DTCs: Pending - When a fault condition Stored - A DTC is stored when a fault is identified during a Drive Cycle, condition has occurred that meets...
-
Page 8: Setup - Before Use
Brought to You by www.snapwhole.com Brought to You by www.snapwhole.com Setup - Before Use: Read the ENTIRE IMPORTANT SAFETY INFORMATION section at the beginning of this document including all text under subheadings therein before set up or use. Functions Figure B OBD II Cable ENTER/Exit Connects the Scan Tool to... -
Page 9: Operating Instructions
Brought to You by www.snapwhole.com Brought to You by www.snapwhole.com Operating Instructions Read the ENTIRE IMPORTANT SAFETY INFORMATION section at the beginning of this document including all text under subheadings therein before set up or use of this product. TO PREVENT SERIOUS INJURY AND DEATH: Exhaust gases are poisonous. - Page 10 Brought to You by www.snapwhole.com Brought to You by www.snapwhole.com Setup From the Startup Screen, press SCROLL to enter System Setup. Note: Setup is not required to operate the Scan Tool. CAN OBD2 CODE READER System Setup OBDII ►1) Language 2) Unit of Measure 3) Contrast 4) Exit...
- Page 11 Brought to You by www.snapwhole.com Brought to You by www.snapwhole.com Diagnostic Menu Note: Not all vehicles return the same data, results may vary from the examples given herein. From the Startup Screen, Control Module will display, press press ENTER. ENTER to view Diagnostic Menu.. CAN OBD2 CODE READER Control Module OBDII...
- Page 12 Brought to You by www.snapwhole.com Brought to You by www.snapwhole.com 2) Erase Codes CAUTION: Do not clear any DTCs before When DTCs have been erased, the the vehicle has been repaired and the following message will appear. system has been checked completely by a qualified technician.
- Page 13 Brought to You by www.snapwhole.com Brought to You by www.snapwhole.com 4) I/M Readiness Check emissions readiness prior to having a vehicle inspected for a state Emissions Test. From Diagnostic Menu, select Interpret data. I/M Readiness , then press ENTER. Check Engine light off, no stored DTCs present.
- Page 14 Brought to You by www.snapwhole.com Brought to You by www.snapwhole.com 5) Vehicle Information Note: Not all vehicles return the Calibration ID same data, results may vary from Cal ID: the examples given herein. 34714000 From Diagnostic Menu, select Vehicle Info., then press ENTER. Figure U Vehicle Info.
-
Page 15: Maintenance
Brought to You by www.snapwhole.com Brought to You by www.snapwhole.com Inspection and Maintenance Procedures not specifically explained in this manual must be performed only by a qualified technician. TO PREVENT SERIOUS INJURY FROM ELECTRICAL SHOCK: Make sure that the Scan Tool is unplugged from the vehicle before performing any procedure in this section. -
Page 16: Warranty
Brought to You by www.snapwhole.com Brought to You by www.snapwhole.com Limited 90 Day Warranty Harbor Freight Tools Co. makes every effort to assure that its products meet high quality and durability standards, and warrants to the original purchaser that this product is free from defects in materials and workmanship for the period of 90 days from the date of purchase.
Need help?
Do you have a question about the CAN IBD II and is the answer not in the manual?
Questions and answers