Operating Instructions:
1. Plug the receiver into a standard 125 V AC electric outlet.
2. Once plugged in, the red light on the receiver will begin to flash (without input, this will last
about 15 seconds). To pair a remote, press the "o " button on the remote for approximately 5
seconds, until the receiver stops flashing.
Red Light
Indicator
3. After pairing, try using the on/o functions on the remote. If pairing was unsuccessful, repeat
steps 1 and 2 until they are successfully paired.
4. Once successfully paired, the on/o functions of the wireless receiver will be available from
your remote control.
5. This device must be mounted in a vertical position with the receptacle facing downwards.
Please ensure the receptacle does not reach ground level.
ON
OFF
Attention:
1. The receiver has a memory function which ensures that even if both the remote and the receiver are without power,
there will be no need to pair the devices again. When the receiver is powered up after losing power, the red light will
flash for 15 seconds. It can be ignored.
2. Do not open product by yourself. Repairs must be performed by an authorized service centre. As proof, the original
receipt must be enclosed.
3. This product is compatible with CFL bulbs. This device complies with Part 15 of the FCC Rules.
NOMA
NOMA
NOMA
Need help?
Do you have a question about the 052-8849-0 and is the answer not in the manual?
Questions and answers