BOSS ILLUMINATION NOD Product Manual

NOD
DOWNLIGHT / CEILING LIGHT

PRODUCT SPECIFICATIONS

Power : 30W
Input Voltage : 240VAC
Operating Temperature : -10 to 40°C
Dimming : Triac
Material : Aluminium
Cutout size : Ø125mm / Ø140mm
44
IP

PARTS INCLUDED

x1
Luminaire
with Inbuilt
Driver
OPTIONAL COMPATIBLE PARTS sold separately
Recessed Deep
Fascia Recessed
Cut Out: Fascia
135mm Cut Out:
125mm
WARRANTY STATEMENT This product is covered by a 5 year replacement warranty.
BIA guarantees this product to be free of defects from the date of purchase for the stated period above. If product fails within the warranty period, BIA will fix
or replace the product. This excludes any costs associated with the removal or installation of product. This warranty is subject to the terms and conditions stated
on www.bia.lighting. Failure to comply with installation guidelines will automatically void the warranty. Please retain purchase receipt. For more information on
warranty please visit www.bia.lighting/warranty
BIA reserves the right to change specifications and other information, modify products and discontinue items without prior notification.
© 2020
COPYRIGHT BIA V
11.20
Disclaimer: Please read this product
manual carefully before installing the
product.
Warranty is void if installation
guidelines are disregarded, if the
product has been modified, or if
damage is caused by misuse or
improper installation.
Images, drawings and diagrams are for
illustrative purposes only.
BIA products are manufactured
and certified in accordance with all
mandatory Australian Standards.
Technical data and information subject
to changes. Please visit our website
for latest version.

PRODUCT VARIANTS

CCT : 3000K
4000K
5000K
Beam Angle : 15°
25°
40°
Fascia :
Recessed
Deep Recessed
Fascia Colour : Black
White

ADDITIONAL INFORMATION

1. BIA recommends using an adaptive phase dimmer with this
product.
2. Module must be installed with designated driver.
3. This product is suitable for indoor and outdoor under cover use.
4. If cleaning maintenance is required, disconnect from mains
supply and allow luminaire to cool. Use a clean microfibre cloth,
slightly dampened with a mild dilution of detergent that is PH
neutral, alcohol free and non-abrasive.
5. Do not use harsh chemicals or solvents. Do not use high
pressure cleaners.
6. Care must be taken during installation and maintenance to
prevent accidental damage to the surface of the luminaire.
These damages may result in corrosion.
page 1 / 2
P R O D U C T M A N U A L
Must be installed by
a licensed electrician.
Must be installed
in accordance with
relevant Australian
Standards.
www.bia.lighting | sales@bia.lighting