Page 2
The DOUBLE FALZ SEAMER is the perfect hand-held equipment for perfect and effortless seaming of single and double standing-seam in one operation. The DOUBLE FALZ SEAMER is used for seaming of single and double standing seam on profile and is suitable for several materials - Stainless steel, steel, Aluminum, Copper and Zinc.
Page 3
DOUBLE FALZ SEAMER SETUP When setting up the DOUBLE FALZ SEAMER we must remove and make sure that cordless drill accumulator is removed from the Accumulator drill machine Only when we are definitely sure that everything is con- nected properly only then we place the battery inside the...
Page 4
Make sure the 3rd roll is below the seam and 4th roll is above the seam Position the Double Falz Seamer on the seam with an open handle and then close the Double Falz Seamer and start seaming! Double Falz Seamer is attachable on any place in to the seam...
Page 5
Position the DOUBLE FALZ SEAMER so that the 3rd roll is in line with the beginning of the metal profile ( see picture ) Pull the handle upwards, so the rolls fix in...
Page 6
Loose clothes, jewellery or long hair can be caught in moving parts. • After using DOUBLE FALZ SEAMER, make sure that the tool isn’t wet and then put it in the box. If sand and dust accumulate around the rollers, clean them.
Page 7
Check all screws periodically. • It is strictly forbidden to put and keep a wet or damp Double Falz Seamer in a case. arranty We guarantee that all DOUBLE FALZ SEAMER is made of high quality materials and does not have any manufacturing defects.
Need help?
Do you have a question about the DOUBLE FALZ SEAMER and is the answer not in the manual?
Questions and answers