Suin SA2200 User Manual page 20

SA2200 Power Quality Analyzer User's Guide
Network Settings
The LAN interface is configured to realize communication between device and PC.
The Analyzer is equipped with a LAN interface for communication with a PC. With supplied
PC software, user can remote control analyzer, download saved files, analyze the data and
create report on PC. In additional, user can also use the PC software to view the data and
screenshot copied from a U disk.
Select 【LAN SETUP】in 【User】option as below picture shown:
Connect the Analyzer with PC by one piece of net cable, set IP address of Analyzer and PC to
different, but should be in the same network segment. For example: IP address in PC is
192.168.1.XXX, while IP address in the Analyzer also should be 192.168.1.XXX accordingly.
After a correct setting IP address for the analyzer, access the analyzer to the network by one
new cable. Open PQA View software, select 【auto connection】or 【manual connection】
(input IP address manually )in 【file】option, after a successful connecting, an operating
interface which simulate the analyzer will pop up and user can download the saved file in
device as below picture shown.
Suin Instruments Co.,Ltd.
-19-