Operating Distance; Operating Conditions - 1Control SOLO MINI Technical Sheet

1Control SOLO MINI - Technical sheet
Description
1Control SOLO MINI is an electronic device that allows the
operation of a radio-controlled automation, such as a gate or
a garage, using a smartphone. SOLO MINI is able to copy the
automation remote control and therefore to control it behaving
like the original remote control.
Control of an automation
SOLO MINI is able to copy the automation remote control and
therefore to control it behaving like the original remote control.
It is able to copy all fixed-coded remote controls and most
rolling-code remote controls, in the 433.0 MHz to 868.0 MHz
frequency bands, using the AM and FM modulations. The
old low-frequency remote controls, called quartz, are not
compatible.
The complete list of compatible remote controls is available on
the 1Control website or in the Complete Guide.
To control an automation, it is sufficient to copy a single remote
control, it is not necessary to copy the remote controls of all
users.
SOLO MINI communicates with smartphone using the Bluetooth
LE 4 protocol. Therefore it is not necessary to have an Internet
connection to open gate and garage.

Operating distance

The max distance between SOLO MINI and an automation to
be controlled varies according to the type of radio-control used.
Normally such distance is between 20 and 40 meters.
The max distance between SOLO MINI and a smartphone
varies according to the model of smartphone used and is
normally about 15-20 meters.
To maximize the range of SOLO MINI it is advisable to place it
at least 1 meter from the ground and in a place where there are
no obstacles between the user and SOLO MINI.
Reinforced concrete walls or metal boxes can weaken or block
the SOLO MINI signal.

Operating conditions

SOLO MINI is resistant to atmospheric agents, is rainproof,
snowproof and resistant to sunrays. It is IP66 certified.
Security
When using SOLO MINI for the first time, an 8-digit numeric
PIN code must be set. This PIN must be kept secret. PIN code
holders are considered administrators of the device. It is
possible to reset the PIN by performing a factory reset of SOLO
MINI.
1 GATE or GARAGE
2 USERS
The SOLO MINI administrator can invite other users to use
an automation, without giving them the PIN code, using the
sharing features offered by the app.
The communication between SOLO MINI and a smartphone
is protected by latest-generation security algorithms based
on public keys and end-to-end symmetric encryption with
ephemeral keys.
The communication between SOLO MINI and an automation
uses the same security algorithms as the copied remote
control. Therefore the degree of security offered in this
communication is the same as that of the remote control.
Power supply
SOLO MINI is supplied with the batteries already fitted and it is
already switched on.
The batteries can be replaced when they are flat. SOLO MINI
keeps the copied remote controls and shared accesses in
memory even when it is not energized.
You can check the charge status of the batteries using the app.
Battery life varies according to the number of drives (openings
or closures) made:
Daily
Average
openings
duration
4 48 months
10 24 months
20 12 months
Date and time
SOLO MINI is equipped with an internal clock that is used to
check the users' access time rights. The internal clock manages
the European daylight saving time independently. The date will
be set automatically by the app at the first start.
Data and limitations
SOLO MINI can control 1 radio-controlled automation, you can
buy more from the app.
It can be used by 2 people/smartphones, you can buy more
users from the app.
1/2