Vixen Horns VXA7240C Installation Manual

BEFORE BEGINNING YOUR INSTALLATION

Read through the instruction guide before getting started with the installation. Professional installation is recommended for
this product.

CONTENTS

 240 PSI Single Needle Air Pressure Gauge (White Face/Chrome Bezel)
Ensure that your air system has no pressure before starting the installation.

SAFETY INSTRUCTIONS

 Do not apply shock to the product such as by dropping, doing so will affect its precision.
 For better results, install the air gauge perpendicular to the ground with the zero point on the dial at the bottom.

Apply sealant to fitting's threads before assembly. DO NOT OVER TIGHTEN.

MOUNTING

 In one of the Air Tank's 1/4" NPT ports, using the thread sealant provided, install the air pressure gauge.
 The side or top of the tank is the best location to use as to prevent condensation from entering into the
gauge.
 Dropping or disturbing the product can affect the product's accuracy.
 For best results, the air gauge should be installed perpendicular to the ground, with the zero facing the
bottom.

To tighten the pressure gauge into the air tank, place a wrench over the square wrench flats to tum the
gauge. This is the proper way to avoid air leakage or damage.
PAGE 1 of 2
VXA7240C
INSTALLATION GUIDE