Download Print this page

Schartec CR4 Quick Start Manual page 2

Cigarette lighter remote with 433.92 mhz fixed-code

Advertisement

Available languages

Available languages

SCHARTEC
a trademark of bau-shop-24 GmbH
Fritz-Müller-Strasse 119
73730 Esslingen
Germany
WEEE Reg. Nr.: DE90317979
Keep remotes out of reach of children.
Remote controls may only be operated by persons who are familiar with the system and have been instructed
in their function.
Use the remote control only when you are in sight of the door / gate.
Coding in remote controls must always be carried out within the vicinity of the door operator. Use only original
parts.
Protect remotes from rain, snow, sunlight or dust, otherwise the function of the transmitter may be impaired
To replace the battery, unscrew the screws on the back of the remote.
The original remote and the CR4 must have the same frequency (433.92 MHz); Rolling-Code frequencies are
not supported; not compatible with DIP switches.
Programming
Step 1:
1. Press button 1 and button 2 at the same time and keep them pressed until the LED has flashed 3 times quickly.
2. Continue to hold down button 1 and press button 2 three times in quick succession.
3. Now the LED flashes permanently. Hold this state for about 3 seconds, then release both buttons.
4. The code is cleared when the LED stops illuminating permanently when a key is pressed. (should the LED light
up and remain lit, then it did not work. Please repeat before you start with step 2!)
WARNING!
This step also serves as a factory reset and deletes all stored codes !!!
Step 2:
1. With the CR4 remote plugged into your vehicle's cigarette lighter slot, hold your original remote control down
close to the CR4.
2. Press and hold the programmed key on your original remote control while holding the original remote control
close to the CR4.
3. Now press the button on your original remote that you would like to transmit and the button on the CR4 that you
would like to inherit the transmitted code. Hold both buttons until the LED lights continuously.
remote lights 2 times fast -> then 3 times slow -> then continuously!
Schartec hereby declares that the remote control CR4 complies with Directive 2014/53/EU. The full text of the EU Declaration of Conformity is
As a dealer for the distribution of electronic, battery-operated devices, we are obliged by law to inform our customers about the following:
Electrical and electronic devices, as well as batteries, must not be disposed of as household or residual waste, but must be delivered in the
Schartec Cigarette Lighter
Remote CR 4
with 433.92 MHz Fixed-Code
Frequency: 433.92 MHz Fixed-Code
dBm: 11
Channels: 4
Working temperature: -20°C to +60°C
Article number: ST301022
Model number: CR4
All channels will have to be re-taught !!!
Programming Video
Please visit www.schartec.de/en
Simplified EU Declaration of Conformity (CE)
available at the following Internet address: www.schartec.de/en
Information about battery regulation
appropriate acceptance and collection points will.
The complete version of the battery law can be found here:
http://www.gesetze-im-internet.de/bundesrecht/battg/gesamt.pdf
IMPORTANT!

Advertisement

loading

This manual is also suitable for:

St301022