Breas iSleep 20 Manual page 41

Detach the rear lid or the
3
HA 01 humidifier (if mounted).
Disconnect all cables.
4
Clean the outside of the iSleep 20
5
using a lint-free cloth and a mild
detergent solution. If the iSleep 20
needs to be disinfected, this can be
done with Virkon
Reconnect cables and the
6
patient circuit. Make sure all
parts are dry before the
iSleep 20 is put into operation.
HA 01 Humidifier
The HA 01 humidifier must be cleaned regularly.
Information on cleaning the HA 01 humidifier can be found in the Breas
HA 01 humidifier User Manual.
The HA 01 humidifier shall be replaced in intervals according to the manufac-
turer's instructions. Also check the HA 01 humidifier for damage regularly. In
case of damage, replace the HA 01 humidifier.
Patient Circuit
The patient circuit should be cleaned and replaced in accordance with the manufac-
turer's instructions.
Doc. 003923 En-Us V-2
or Lysetol Med.
® ®
Cleaning the iSleep 20 and Replacement of Accessories
iSleep 20 clinician's manual
41