Advertisement
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Green-Go GGO-BEACON
Summary of Contents for Green-Go GGO-BEACON
- Page 1 Beacon Quick Start Guide...
-
Page 2: Product Description
Green-GO Beacon Quick Start Guide Product description The Green-GO Beacon is a full colour signal indicator with a transparent casing and bright interior LEDs that will emit a signal when receiving talks, cues or calls. Features • Multicolour signal light •... -
Page 3: Button Functions
Setup The Beacon has a single-button, bicolour LED interface with quick access to the basic functions. Further options can be set with the Green-GO update connection software. To access the button functions, see the descriptions below. Button functions Cloning config Press and hold the button for 10 seconds à... -
Page 4: Enhanced Functions
Enhanced functions Enhanced functions are available using the Green-GO update connection software. To connect the device to the Green-GO update connection software, make sure the computer is in the same IP range as the Beacon. The default IP setting of a Beacon is set to dynamic. When no DHCP server is present, the Beacon will get an IP address in the 169.254.xxx.xxx range. - Page 5 Colours The colours of the different signals of the Beacon can be adjusted by changing the global colour scheme of the Green-GO config used. This can be done in the Config settings menu of the Green-GO control software. Default Colors...
-
Page 6: Declaration Of Conformity
Herewith take the full responsibility to confirm that the product Product Category: Communication equipment Name of product: GGO-BEACON Which refer to this declaration are manufactured in the Netherlands and complies with the following product specifications and harmonized standards: Safety: LVD (Low Voltage Directive) 2014/35/EU, EN62368-1...
Need help?
Do you have a question about the GGO-BEACON and is the answer not in the manual?
Questions and answers