Subscribe to Our Youtube Channel
Related Manuals for SmartAVI 4K-Wall
Summary of Contents for SmartAVI 4K-Wall
- Page 1 4K-wall HDMI/DVI Video Wall Controller and 4x4 Integrated 2x2 Video Wall Controller and 4x4 Port HDMI, Real Time Switch Matrix with On Screen Display Control & No Software Required. 1-800-284-2131 www.smartavi.com...
-
Page 2: Table Of Contents
4x4 Port HDMI, Real-Time switching matrix with intergrated 2x2 SM-4KWL-S video wall CCPWR06 6’ Power Plug Cable SAVI-RMT IR Remote Control SM-EYE-NY IR Receiver EN-QKVM-EAR-P Rack mount brackets Quick Start Guide Brackets for mounting this device in a standard 19” rack can be ordered from SmartAVI. Figure 2-1... -
Page 3: Introduction
INTRODUCTION To create a four-screen 2x2 video wall with four HD video inputs, the 4K-Wall video wall controller provides a truly simple plug-and-play hardware solution. With four inputs and four outputs, users can arrange their content in numerous ways, providing unique functionality by combining the abilities of a video wall hardware controller and a 4x4 HDMI port Matrix. -
Page 4: Technical Specifications
Audio Formats * MP3, WMA, AAC, MP2, PCM, AC3 Photos Max Resolutions * JPEG - 15360x8640, BMP - 9600x6400, PNG - 9600x6400 *PLEASE NOTE: 4K-WALL 3x3V2 only supports the primary formats listed above. Any unlisted formats are not compatible with 4K-Wall. -
Page 5: Installation
LEARN EDID Once 4K-WALL 2x2 boots up, it will automatically default to HDMI + Audio for the EDID. Depending on the monitors used, using either the built in custom EDID may work better than the local EDID or vice versa. - Page 6 Quad Mode: User can divide each screen into four sections with all four in- puts playing on each screen. Users can place each screen in different loca- tions, further enhancing the 4K-WALL’s matrix functionality. Press QUAD with desired channel 1,2,3,4...
-
Page 7: On Screen Display (Osd)
The on-screen display will disappear after a few seconds of inactivity or you can press MENU to make the on-screen display disappear. The 4K-Wall will remain in video wall mode and the input can be changed by pressing the corresponding number button. - Page 8 The on-screen display will disappear after a few seconds of inactivity or you can press MENU to make the on-screen display disappear. The 4K-Wall will remain in Full mode and the input can be changed by pressing the corresponding number button.
- Page 9 Quad Mode: QUAD MODE: Users can divide each screen into four sections with all four inputs playing on each screen. Users can place each screen in different locations, further enhancing the 4K-Wall’s matrix functionality. Press the MENU button and navigate to highlight QUAD.
- Page 10 ON-SCREEN DISPLAY (OSD) (CONTINUED) PiP Mode: PiP MODE: Users can create Picture in Picture (PiP) displays on each screen using all four inputs, with one large HD source and three accompanying PiP sources alongside. Press the MENU button and navigate to highlight PiP. ...
- Page 11 Figure 7-6 Bezel Compensation Bezel Compensation only applies when the 4K-WALL is in Wall Mode. Each individual output can be adjusted horizontally and vertically. See Figure 8-1. Please note that Factory Reset will restore any adjusted values back to default.
- Page 12 Flip / Unflip allows the user to flip the top row of monitors (1 & 2) to be oriented upside down to ad- just for bezel size (dependent on monitor). Flip / Unflip will only apply when the 4K-WALL is in Wall Mode.
- Page 13 ON-SCREEN DISPLAY (OSD) (CONTINUED) OSD Factory Reset Factory Reset will restore any adjust values back to default. Please note 4K-WALL will always default back to HDMI + Audio for the EDID. Figure 7-10...
-
Page 14: Control Using Ir Remote Control
On Screen Display (OSD) gives users great flexibility and ease of use when looking to manage their video wall. It can be operated with the IR Remote Control. IR REMOTE CONTROL The 4K-WALL will only respond to the remote control unit provided in the box. See Figure 10-1. -
Page 15: Control Via Ethernet (Tcp/Ip)
CONTROL VIA ETHERNET (TCP/IP) 4K-Wall TCP/IP control is a feature that allows mode switching and other configurations to be con- trolled remotely via HTTP or TELNET. Manage the switching functions of your 4x4 matrix with ease from anywhere in the world. You can save input/output configuration presets for easy access. - Page 16 Select the correct COM port on the PC. Use the following connection settings: 115200, N, 8, 1, no flow control. Once the connection is established type “?” and hit enter. The 4K-WALL should respond with a ver- sion number and a list of commands. See Figure 11-1 for sample PuTTY screens.
- Page 17 USING RS-232 CONTROL (Continued) When connected to the 4K-WALL using a computer via RS-232 connection, a startup screen should appear. Below are some examples of RS-232 commands: Type ? to see the Main Menu list of commands 4KWall v3.0 main menu...
- Page 18 -exit to main menu -help RS-232 INTEGRATION WITH THIRD PARTY SOFTWARE Smart-AVI RS-232 Protocol 4K-WALL Carriage return is represented in the examples by <CR> The HEX code for carriage return is 0D See Page 6 for an illustration of available modes.
- Page 19 UPDATING FIRMWARE VIA RS-232 When new firmware is released, 4K-Wall can be updated through RS-232. To do so, please follow the instruction provided accordingly. Run the terminal client of your choice such as HyperTerminal or PuTTY. Select the correct COM port on the PC.
-
Page 20: Limited Warranty Statement
LIMITED WARRANTY STATEMENT Extent of limited warranty Smart-AVI Technologies, Inc. warrants to the end-user customers that the Smart-AVI product specified above will be free from defects in materials and workmanship for the duration of 1 year, which duration begins on the date of purchase by the customer. - Page 21 NOTICE The information contained in this document is subject to change without notice. SmartAVI makes no warranty of any kind with regard to this material, including but not limited to, implied warranties of merchantability and fitness for particular purpose. SmartAVI will not be liable for errors contained herein or for incidental or consequential damages in connection with the furnishing, performance or use of this material.
Need help?
Do you have a question about the 4K-Wall and is the answer not in the manual?
Questions and answers