OEM Tools 25896 Installation And Operation Manual

8 gallon portable oil drain

Download this manual

INSTALLATION AND OPERATION MANUAL

8 GALLON PORTABLE OIL DRAIN

OEMTOOLS

PART# 25896

SHIPPING DAMAGE CLAIMS

When this equipment is shipped, title passes to the

purchaser upon receipt from the carrier. Consequently,

claims for the material damaged in shipment must be

made by the purchaser against the transportation

company at the time shipment is received.

PLEASE READ THE ENTIRE CONTENTS OF THIS MANUAL PRIOR

TO INSTALLATION AND OPERATION. BY PROCEEDING YOU

AGREE THAT YOU FULLY UNDERSTAND AND COMPREHEND

THE FULL CONTENTS OF THIS MANUAL. FORWARD THIS

MANUAL TO ALL OPERATORS. FAILURE TO OPERATE THIS

EQUIPMENT AS DIRECTED MAY CAUSE INJURY OR DEATH.

BE SAFE

OEMTOOLS

safety in mind. However, proper training and thoughtful

operation on the part of the operator can increase your

overall safety. DO NOT operate or repair this equipment

without reading this manual and the important safety

instructions shown inside.

Keep this operation manual near

the machine at all times. Make sure

that ALL USERS read this manual.

Oil Drains are designed and built with

165 East Second Street

Customer Service: 1-866-458-2472

REV: 4/2012

PART# 25896

P.O. Box 3

Mineola, NY 11501

www.oem-tools.com

Page 1 AGREE THAT YOU FULLY UNDERSTAND AND COMPREHEND THE FULL CONTENTS OF THIS MANUAL. FORWARD THIS MANUAL TO ALL OPERATORS. FAILURE TO OPERATE THIS EQUIPMENT AS DIRECTED MAY CAUSE INJURY OR DEATH. REV: 4/2012 PART# 25896 INSTALLATION AND OPERATION MANUAL 8 GALLON PORTABLE OIL DRAIN ® OEMTOOLS...
Page 2 PROPERLY TRAINED PERSONNEL ONLY. OPERATION BY UNTRAINED PERSONNEL MAY RESULT IN INJURY AND /OR ® If your OEM TOOLS machine is not functioning PROPERTY DAMAGE. properly, call immediately. On some occasions, an independent contractor may be hired to do the repairs.
Page 3 worn parts, decals or warning labels be replaced with manufacturer’s specified parts. THIS OPERATING MANUAL CONTAINS IMPORTANT DETAILS CONCERNINGTHE SAFE OPERATION OF THIS EQUIPMENT. THE USER MUST READ AND UNDERSTAND THESE DETAILS BEFORE ANY USE OF THE EQUIPMENT. THIS MANUAL MUST BE ALTERATIONS RETAINED FOR FUTURE REFERENCE.
Page 4 PARTS & ASSEMBLY Funnel Assembly Instructions Two-Piece Down Spout Remove all contents from the package. Assemble two-piece down spout using the provided bolt, nut and washer. Insert the funnel into the down spout using the Philips screws to secure. Install clamp on to tank neck. Insert down spout and funnel assembly into tank, tighten clamp at desired height.