Battle Born Batteries LiFePO4 BB5024 Quick User Manual

The pinnacle of quality and safety at an unbeatable price point.
Model BB5024
50 Amp Hours
Deep Cycle Efficiency and Performance
This 24 volt 50 amp hour deep cycle LiFePO4 battery
offers double the power in the same physical space as
a lead acid. The stable chemical composition and built-
in battery management system in our batteries
provides you with safe and reliable power.
These low-maintenance batteries are a fifth of the
weight of a comparable lead-acid. Our batteries are
capable of being discharged to 100% of their rated
capacity every time. They can be charged 5 times
faster than lead-acid, so you can get out there and
stay out there longer!
Our batteries are built to last 10 to 15 years and are
backed by an industry leading 10-year warranty,
making battery anxiety a thing of the past.
Specifications
• 50 Amp Hour, 24 Volt Battery
• LiFePO4 Chemistry
• 3000-5000 Cycles
• Dimensions (L x W x H):
12.76" x 6.86" x 8.95"
*See QR Code below
• 31 lbs.
• Operating Temp Range:
-4°F (-20°C) to 135°F (57.2°C)
• Water Resistant and Sealed
(
Batteries should not be submerged)
• Designed and Assembled
in the USA
• Built-in BMS
(Battery Management System)
The LiFePO
4
Charging Parameters
• Absorption Voltage:
28.4V to 29.2V
• Float Voltage:
26.8 to 27.6V
• Equalization Voltage:
28.8V (if Applicable)
• Absorption Time:
30 minutes
per 100Ah battery bank
• No Temperature Compensation
Get out there, stay out there.
Questions? Call 855-292-2831 or email us at info@battlebornbatteries.com
Battle Born Battery
Built-in Battery
Management System
Our BMS keeps you and your battery safe and
ensures your battery will last for many years.
• 60 Amps Continuous
• 100 Amps Surge for 30 Seconds
• ½ Second Surge for Loads Over 200 Amps
• High/Low Voltage Protection
• Short Circuit Protection
• High/Low Temperature Protection
• Cold Charging Protection
• Automatic Cell Balancing at Top of Charge
*Please Note: This built-in protection will reset after 5
seconds in most fault conditions. Disconnecting the
battery from loads will also reset the BMS.
Please Read Before Installation
TM
*QR Code