Summary of Contents for FASANO TOOLS FG 494/A180
- Page 1 FG 494/A180 SAFETY INSTRUCTIONS AND INSTRUCTION MANUAL REV.0 092014 The reproduction of this document (even in partial form) is prohibited without the Fasangas Srl authorization...
- Page 2 CATALOGUE GENERAL WARNINGS PAG. 10 TECHNICAL SPECIFICATIONS PAG. 10 IMPORTANT SAFETY INSTRUCTION PAG. 10 OPERATION PAG. 12 PREVENTIVE MAINTENANCE PAG. 12 TIPS ON USING PAG. 12 DISPOSAL INFORMATIONS PAG. 13 EC DECLARATION OF CONFORMITY PAG. 13 WARRANTY PAG. 13...
- Page 3 This tool and its accessories, must only be used for the purpose for which they have been conceived. A different use from as,for example, the un-observance of the safety instruction, the use of no original accessories and operation not authorized on the product.. 2. TECHNICAL SPECIFICATIONS Model: FG 494/A180 Type: HOT MELT GLUE GUN SPECIFICATION: Rated Voltage:...
- Page 4 Keep children away. Small children must be kept away from work area. Accidental contact with tool or extension cord should be avoided. Children should not use this glue gun, only under the direct supervision of a responsible adult. Glue gun storage. After use, allow glue gun to cool completely prior to storage. When not in use, the glue gun should be stored in dry and secure location out of the reach of children.
- Page 5 4. OPERATION 1. Plug the glue gun into any AC outlet with required specification; red light on means the power is on. 2. Allow the tool to heat for approximately 3-5 minutes. Insert a stick of adhesive into the back of the tool.
- Page 6 The hot-melt adhesives quick set time eliminates the need for clamps or other holding devices. The hot-melt begins to soften when the temperature exceeds 140°F (60°C) and should not be used on items that will be subjected to temperatures above that. Hot-melt adhesives can be used in place of nails, staples, tapes, or liquid glue: however, they should not be used to replace structural fastener where heavy loads are involved.
Need help?
Do you have a question about the FG 494/A180 and is the answer not in the manual?
Questions and answers