Advertisement
Quick Links
Operation voltage
Consumption
Tx/Rx frequency range (wireless emerg. lighting)
Tx power (wireless emerg. lighting)
Wifi connectivity
Wifi security
Tx power (Wi-Fi)
Rx sensitivity (Wi-Fi)
Produced in accordance with
Construction materials
Operation temperature range
Storage temperature range
Relative humidity
Typical weight
External dimensions (L x W x H)
Guarantee
The GR-7602 Wifi Gateway is a master device of the wireless
emergency lighting network. It transfers the received data from
the GR-7600 PC software to the wireless network and vice
versa.
One only Gateway can exist in each wireless network.
Features:
• Powered from mains 220 - 240VAC
• Status and signal indication LEDs
• Fast 868-870MHz wireless connectivity
• Mini Access Point setup interface
• 2.4GHz IEEE 802.11 b/g/n
• WPA2-PSK
LED indications:
: Power On LED (Green).
RF
: RF LED (Orange) . Blinking when receiving data from the connected wireless devices.
: Signal broadcasting LED (Orange). Blinking indicates Gateway transmissions (beacon).
Button BT1 functions*:
• Short press (<1s): Send status message to the PC Software.
• Long press (>1s and <10s): Reset Gateway.
• Extended press (>10s): Load default settings to the Gateway.
Button BT2 functions*:
• Long press (2s): Establish Mini Access Point (WL Light WiFi). LED LD7 2blinks/s
*The Buttons are only accessible when the front cover is removed. See schem. 2 - Wiring on page 4.
Page 1 of 5
GR-7602 Wifi Gateway
TECHNICAL CHARACTERISTICS
Thank you for your trust in our products
Olympia Electronics - European manufacturer
220 - 240VAC (50 - 60Hz)
868 - 870MHz
18.3 dBm @ 1Mbps DSSS / 13.7 dBm @ 54 Mbps OFDM
96.0 dBm @ 1 Mbps DSSS / 74.5 dBm @ 54 Mbps OFDM
EN 62311:2008, EN 62368-1:2014 +AC:2015,
ETSI EN 301 489-1 V1.9.2, ETSI EN 301 489-3 V1.6.1
ETSI EN 301 489-17 V3.1.1, ETSI EN 300 328 V2.1.1
120 x 80 x 34mm
2VA
11dBm
802.11 b/g/n
WPA2-PSK
ABS/PC
o
5 to 40 C
o
-40 to 70 C
Up to 95%
190gr.
2 years
923760200_09_001
Advertisement
Related Manuals for olympia electronics GR-7602
Summary of Contents for olympia electronics GR-7602
- Page 1 Thank you for your trust in our products Olympia Electronics - European manufacturer The GR-7602 Wifi Gateway is a master device of the wireless emergency lighting network. It transfers the received data from the GR-7600 PC software to the wireless network and vice versa.
- Page 2 Installation: It’s recommended that the GR-7602 Wifi Gateway is positioned at a central point of the entire wireless emergency lighting installation. At least 2 or 3 luminaires should be inside the signal range of the Gateway in order to create alternative routes for re-transmitting messages to other devices inside their own range.
- Page 3 Setup connection via Mini Access Point: Open the front cover. Press for 2 seconds the button BT2 on the left part of the PCB. The GR-7602 now will establish a temporary mini Wi-Fi Access Point, named as “WL Light WiFi” without security (Ld7 2 blinks/s) (see page 4 for LED6/7 indications).
- Page 4 WiFi connection LED Indications: LED 7: LED 6: • 1 blink/s - connected to • Blinking according to Wi-Fi network data traffic (Tx/Rx) • 2 blinks/s - mini Wi-Fi AP established • 3 blinks/s - WPS conn. activated (N.A.) • Steady ON - disconnected from Wi-Fi network Schematic 2: Wiring Button BT2...
-
Page 5: Warranty
Olympia Electronics reserves the right to repair or to replace the returned goods and to or not charge the buyer depending on the reason of defection. Olympia Electronics reserves the right to charge or not the buyer the transportation cost.