Buffalo CW306 Instruction Manual page 2

UK
Safety Tips
• Position on a flat, stable
surface.
• A service agent/qualified
technician should carry out
installation and any repairs if
required. Do not remove any
components on this product.
• Consult Local and National
Standards to comply with the
following:
- Health and Safety at Work
Legislation
- BS EN Codes of Practice
- Fire Precautions
- IEE Wiring Regulations
- Building Regulations
• DO NOT use jet/pressure
washers to clean the
appliance.
• DO NOT immerse the
appliance in water.
• Do not overfill the water
reservoir. (When fully filled,
the "full" indicator light will
illuminate.)
• Ensure the power cord never
touches the hotplate.
• DO NOT touch hot
surfaces.
2
CW306_ML_A5_v4_20201013.indb 2 CW306_ML_A5_v4_20201013.indb 2
• DO NOT touch the hotplate
when the appliance is on.
• DO NOT leave the appliance
unattended during operation.
• DO NOT remove the filter
basket during the filtration
process.
• Never leave the empty
glass jug on the hotplate
when the coffee maker is
on. Otherwise, the carafe is
liable to crack.
• DO NOT place on or near hot
surfaces such as a hob or
radiant rings or near a naked
flame.
• Suitable for indoor use only.
• Always switch off and
disconnect the power supply
to the appliance when
cleaning or not in use.
• Never use accessories which
are not recommended by the
manufacturer. They could
pose a safety risk to the
user and might damage the
appliance. Only use original
parts and accessories.
• This appliance must only
be used in accordance with
these instructions and by
persons competent to do so.
2020/10/13 10:48 2020/10/13 10:48