Rain Harvesting Clean Rain Ultra Installation And Specification Manual

PRODUCT DIMENSIONS
LEFT SIDE VIEW
ALL DIMENSIONS IN MM UNLESS OTHERWISE STATED.
Pipe Fitment
Cap (cut to suit)
Downpipe Adaptors Round
Rectangle
Outlet
DISCLAIMER This product specification is not a complete guide to product usage. Product specifications may change without notice. For more
information visit rainharvesting.com.au. Keep this manual handy for future reference. © Rain Harvesting Pty Ltd.
+61 (0)7 3248 9600
229
206
FRONT VIEW RIGHT SIDE VIEW
90mm pipe fits inside
100mm pipe fits inside
100x75mm pipe fits inside
100x50mm pipe fits inside
Fits into 90mm pipe
100mm pipe fits inside
Fits into 100x75mm pipe
Fits into 100x50mm pipe
20mm garden hose thread
2mm greywater hose
38mm pool hose
Fits into 90mm pipe
(cut off end of outlet)
rainharvesting.com.au
Clean Rain Ultra
PRODUCT DETAILS
FEATURES AND BENEFITS
Installation and Specification Guide
PRODUCT DETAILS
An all-in-one rainwater diverter which
incorporates a rain head and first
flush diverter to ensure clean water is
diverted to your rainwater tank, rain
barrel, pool or garden. The integrated
cover and cap provide a stylish finish.
DDCR01 Multi-Fit (90mm, 100mm, 100x75mm
and 100x50mm)
FEATURES AND BENEFITS
• All-in-one rain head and first flush diverter
• Keep leaves and debris out of your pipes
and tank
• Remove suspended and dissolved organic
and inorganic fine particles
• No additional first flush diversion pipe
chamber required
• Fits standard garden, 22mm grey water
and 38mm pool hoses, and 90mm pipe
• Fits wide range of downpipe sizes
• Built in safety overflow to stormwater