Summary of Contents for Home Depot BioBidet HD-7000
- Page 1 Water Does It Better Water Does It Better Home Depot Exclusive HD-7000 7900 S Illinois Route 31 T) 847.458.2334 BBC Innovation Corp. Crystal Lake IL 60014 T) 877.339.5214 www.biobidet.com F) 847.854.1296...
-
Page 2: Table Of Contents
Safety Precautions Parts & Configuration Installation Operation Maintenance & Cleaning Settings Troubleshooting Dimensions Specifications Memo Warranty Information... -
Page 3: Safety Precautions
Safety Precautions IMPORTANT SAFEGUARDS WARNING – To reduce the risk of burns, electrocution, re or injury to persons: When using electrical products, especially when children are present, ● basic safety precautions should always be followed. Close supervision is necessary when this product is used by, on, ●... - Page 4 Safety Precautions GROUNDING INSTRUCTION DANGER - Improper use of the grounding plug can result in a risk of electric shock. This product has a three-prong grounding plug, which must be plugged into an outlet that is properly installed and grounded. In the event of an electrical short circuit, grounding reduces the risk of electric shock by providing an escape wire for the electric current.
-
Page 5: Parts & Configuration
Parts & Con guration Main Body Operation panel Power Plug BIDET TURBO PULSE SEAT TEMP To control the To run the bidet To run the turbo To run the pulse function To control seat nozzle position. function. (1 minute) function. (1 minute) during wash/bidet/ temperature. -
Page 6: Installation
Installation Remove the existing water hose After installing the T-valve, Remove the seat from the existing Turn on the water and check toilet body. and then install T-valve to the connect the supplied bidet hose for leaks. bottom of the toilet tank. Ensure from the center of the T-valve to Release the nuts, and then remove the seat and cover the rubber washer is properly... - Page 7 Sit On The Toilet Seat Wash, Bidet, Turbo Child Function Nozzle Position Control Make skin contact with the seat sensor. Select one ot the functions listed above. When selecting Child function, settings adjust to Nozzle position is adjustable. (5 positions) low pressure.
- Page 8 Seat/Water Temperature Control Energy Saving Fuction Automatic tank draining Sitz Bath ECO 1 Seat/Water temperature is adjustable. (4 levels) To protect from water contamination, the water tank Wash or Bidet is switched to Wash Sitz Bath or - This mode is activated by pressing the Energy (Off - Low - Middle - High) will be drained(replaced) for 2 minutes if the seat is Bidet Sitz Bath if Nozzle Cleaning button is pressed...
-
Page 9: Operation
Maintenance & Cleaning Settings : Seat sensor ‘off’ : Seat sensor ‘on’ : Regardless of on/off Screen Filter Cleaning Extended Non-Use Seat Initial Function Switch operation Description status status Close the water valve. When bidet seat is not used for an extended period of time, unplug and drain the unit. -
Page 10: Troubleshooting
Troubleshooting Dimensions Please check the following points before requesting repair service. Problem Check list Check if the power plug is not connected. Completely out of order Check if the power supply or outlet has failed. Check if the water supply is turned on. Check if water valve is open. - Page 11 Speci cations Item HD-7000 AC 120V, 60Hz Rated voltage Max. Power consumption 870W Power cord length 1.2m Water feed method Directly connects to water pipe Recommended inlet water pressure 99~106.6psi 0.13~0.21gal/min Wash Bidet 0.13~0.18gal/min Feed Volume Turbo 0.13~0.18gal/min Child 0.13~0.16gal/min Wash 5 levels Pressure control...
- Page 12 7900 S Illinois Route 31 T) 847.458.2334 BBC Innovation Corp. Crystal Lake IL 60014 T) 877.339.5214 www.biobidet.com F) 847.854.1296...
Need help?
Do you have a question about the BioBidet HD-7000 and is the answer not in the manual?
Questions and answers
My automatic tank draining feature does not work no matter how long I hold the stop and water temp buttons. I even tried it sitting on the seat as well as off.
To fix the automatic tank draining feature on the BioBidet HD-7000, follow these steps:
1. Check Activation: The automatic tank draining feature activates if the stop button is pressed for longer than 3 seconds. Ensure this is not happening unintentionally.
2. Turn Off Power: Unplug the power cord from the outlet before performing any maintenance.
3. Drain Manually: Use a screwdriver or coin to open the drain plug and manually drain the tank if necessary.
4. Check Seat Sensor: If the occupied seat sensor is deactivated, some functions may not work correctly. Ensure it is turned on if needed.
5. Prevent Water Damage: Do not spray water directly onto the unit, and make sure no water splashes into the power plug or outlet.
If the issue persists, check for power supply and water connection problems or refer to troubleshooting steps in the manual.
This answer is automatically generated