Advertisement
Quick Links
1. Press the 'On' button on the
cloning machine.
2. Place the original remote,
where it is marked "Place
remote here".
3. Press any button on the origi-
nal remote while it is still placed
in the correct position. You now
know the correct frequency that
this remote operates at. Please
note this frequency down.
4. Remove the cover from
(RCR10) you are going to use.
Advertisement
Summary of Contents for Remote King RCR10
- Page 1 You now know the correct frequency that this remote operates at. Please note this frequency down. 2. Place the original remote, where it is marked “Place remote here”. 4. Remove the cover from (RCR10) you are going to use.
- Page 2 5. Replace the original remote, 7. Replace the RCR10, with the with an RCR10 in the position original remote once again. that is marked “Place remote here”. button on the RCR10, adjust 8. Press button 1 on the clon- the frequency by turning the...
- Page 3 9. On the screen should be dis- 13. Connect the data link ca- ble (as pictured) to the RCR10 ton on the original remote, un- cloning remote. Press button ‘2’ on the cloning machine. If it appears on the screen. If there will be displayed on screen.
Need help?
Do you have a question about the RCR10 and is the answer not in the manual?
Questions and answers