Download
Share
Print this page
  1. Manuals
  2. Brands
  3. V-TAC Manuals
  4. Receiver
  5. VT-5129
  6. Installation instructions manual

V-TAC VT-5129 Installation Instructions Manual

Wifi receiver
Hide thumbs
1
2
3
4
5
6
7
8
9

Advertisement

Quick Links

Download this manual
INSTALLATION INSTRUCTION
INTRODUCTION & WARRANTY
Thank you for selec�ng and buying V-TAC Product. V-TAC will serve you the best. Please read
these instruc�ons carefully before star�ng the installa�on and keep this manual handy for
future reference. If you have any other query, please contact our dealer or local vendor from
whom you have purchased the product. They are trained and ready to serve you at the best.
The warranty is valid for 2 years from the date of purchase. The warranty does not apply to
damage caused by incorrect installa�on or abnormal wear and tear. The company gives no
warranty against damage to any surface due to incorrect removal and installa�on of the
product. This product is warranted for manufacturing defects only.
*Note: The product depicted in this manual may appear slightly different from what you
receive in the box
MULTI-LANGUAGE MANUAL - QR CODE
Please scan the QR code to access the manual
in mul�ple languages.
WIFI RECEIVER
WEEE Number: 80133970
2
WARRANTY
*

Advertisement

loading
Need help?

Need help?

Do you have a question about the VT-5129 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Summary of Contents for V-TAC VT-5129

  • Page 1 INTRODUCTION & WARRANTY WARRANTY Thank you for selec�ng and buying V-TAC Product. V-TAC will serve you the best. Please read these instruc�ons carefully before star�ng the installa�on and keep this manual handy for future reference. If you have any other query, please contact our dealer or local vendor from whom you have purchased the product.

  • Page 2: Receiver Installation

    INTRODUCTION Based on radio frequency (RF) and energy harves�ng technology, wireless switch does not need external power supply to control. When pressing the bu�on, the mechanical energy automa�- cally converts into electrical energy. Meanwhile the switch will send out radio signals to control the receiver on/off.
  • Page 3 NOTES The integrated load of the wireless receiver is 1000W. Lamps can be: LED lights, incandescent bulbs, exhaust fans, or WIFI devices etc. AC 180~275V or 80~150V A two-gang wireless switch controls 2 A one-gang wireless switch controls a wireless receiver wireless receivers APPLICATION (HOME,HOTEL,INN OR FACTORY ETC.) Three two-gang wireless switch controls...
  • Page 4 A hand remote control switch controls 3 A three-gang wireless switch controls 3 wireless receiver. wireless receivers CODE OPERATION PAIRING THE SWITCH & THE RECEIVER 1. Connect the receiver between the light and the power source. 2. Power on electricity, press and hold the se�ng bu�on for 2 seconds. When the indicator light flashes, it enters the matching code mode, then loosen your finger.
  • Page 5 DELETING ADDITIONAL SWITCH FROM A PAIRED SWITCH Press and hold paired switch panel for about 60s, during which LED indicator on switch changes from: firstly blinks rapidly; secondly blinks 8 �mes slowly, thirdly blinks 9 �mes at slower speed, finally blinks once at slowest speed, then loosen UNPAIRING THE RECEIVER Press and hold the receiver bu�on for about 10s, loosen you finger when indicator light changes from rapid blinks to slower, press the paired switch panel cannot control the lamps...
  • Page 6 IF THE RECEIVER IS IN OPEN STATE, - Turn on the tradi�onal switch to light the lamps, the wireless switch can control the lamps. - Turn off the tradi�onal switch to light the lamps, the wireless switch cannot control the lamps. METHOD OF SETTING THE RECEIVER IN OPEN STATE Press and hold switch bu�on for 16s, loosen your finger when the indicator light is con�nuously bright.

  • Page 7: Specifications

    Pick up the area where you ’re going to place the switch, clean the surface with wet rag, post the adhesive rubber in the back of the switch, then a�ach the switch to the clean surface. 2.Install with screws (not included) First, take apart the frame and bu�on panel of the switch, Fix the switch base on the wall with two screws, then install the parts together.
  • Page 8 PARAMETERS OF THE WIRELESS SWITCH 86*86*11MM 1-gang, 2gang, Product Size Type 86*86*13MM 3-gang Switch times >600,000 times Working frequency 433.932 MHz +/-75KHz Sensitivity -116dB Working voltage 3V (CR2032) > 300,000 times Package weight 82~86g Life of the ba�ery < 30 mA <...

  • Page 9: Delete Keys

    Finally blinks once at slowest speed, then loosen your grip, press the remote key again to check if you the keys have been deleted or not. IN CASE OF ANY QUERY/ISSUE WITH THE PRODUCT, PLEASE REACH OUT TO US AT: SUPPORT@V-TAC.EU FOR MORE PRODUCTS RANGE, INQUIRY PLEASE CONTACT OUR DISTRIBUTOR OR NEAREST...