Berker DALI Operating Instructions

Berker DALI Operating Instructions

Rotary potentiometer

Advertisement

Quick Links

Rotary potentiometer DALI with power supply, Rotary potentiometer DALI,
Tunable white
Rotary potentiometer DALI with power supply
Art. no.: 2998
Rotary potentiometer DALI, Tunable white
Art. no.: 2997
Operating instructions
1

Safety instructions

Electrical devices may only be mounted and connected by electrically skilled persons.
Serious injuries, fire or property damage possible. Please read and follow manual fully.
Danger of electric shock. Always disconnect before carrying out work on the devise or load. In
so doing, take all the circuit breakers into account, which support dangerous voltages to the
device and or load.
These instructions are an integral part of the product, and must remain with the end customer.
2

Device components

(1)
DALI potentiometer
(2)
Frame
(3)
Central plate
(4)
Control knob
(5)
Screw terminals
3

Function

Intended use
Brightness setting for luminaires with DALI interface
Setting the colour temperature for luminaires with DALI Device Type 8 for Tunable White
in accordance with IEC 62386-209
Mounting in appliance box according to DIN 49073
Product characteristics
The DALI potentiometer with power supply unit supplies the control current for 26 DALI
subscribers.
82594701
6LE007177A
Figure 1
1 / 5
30.04.2019

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the DALI and is the answer not in the manual?

Questions and answers

Summary of Contents for Berker DALI

  • Page 1 Intended use – Brightness setting for luminaires with DALI interface – Setting the colour temperature for luminaires with DALI Device Type 8 for Tunable White in accordance with IEC 62386-209 – Mounting in appliance box according to DIN 49073 Product characteristics –...
  • Page 2 Rotary potentiometer DALI with power supply, Rotary potentiometer DALI, Tunable white – Parallel switching of up to four DALI potentiometers with power supply unit with the option of supplying up to 104 DALI subscribers. – The DALI potentiometer without a power supply unit is powered using the DALI voltage and serves as an additional control section.
  • Page 3 DALI subscriber e. g. DALI electrical ballast DALI potentiometer without power supply unit ■ Connect the DALI potentiometer and DALI electrical ballast according to the wiring ex- ample (Figure 3). In so doing, observe the data of the electrical ballast manufacturer. ■...
  • Page 4 The lighting switches briefly off and on again. The basic brightness is saved. Saving colour temperature limiting values The setting range of the DALI potentiometer can be adjusted to the colour temperature of the lu- minaire with this setting. When saving the colour temperature, you must ensure that the last turn of the pressed control knob (Figure 2) is made to the left for the warmest light colour (W) and to the right for the coldest light colour (C).
  • Page 5 Rotary potentiometer DALI with power supply, Rotary potentiometer DALI, Tunable white Berker GmbH & Co. KG Klagebach 38 58579 Schalksmühle/Germany Telefon + 49 (0) 23 55/905-0 Telefax + 49 (0) 23 55/905-3111 www.berker.com 82594701 30.04.2019 5 / 5 6LE007177A...

This manual is also suitable for:

29982997

Table of Contents