Yardworks 060-0194-4 Instruction Manual page 14

model number 060-0194-4 | contact us: 1.866.523.5218
IMPORTANT: The 3 locking positions are: 18, 21 and 26"
!
(46, 53 and 66 cm).
!
WARNING: Only requires 1/2 a turn before pressure begins to
release. DO NOT overturn the release valve or the valve screw
will come out and spill hydraulic fluid.
To raise the mower:
Make sure the cylinder valve is closed by turning the valve clockwise.
If yes, proceed to insert the handle into the cylinder handle opening.
Proceed to pump the handle up and down to raise the lift to the desired
height. The cylinder will use pumping action of the handle to raise the lift.
The automatic locking mechanism will engage at three different lift
heights.
13