Wi-Fi Connectivity - Breville the AirDynamic 3D Connect Instruction Book

REMOTE CONTROL
The Breville air circulator comes with a remote
control. This remote control features the same
buttons as the control panel (except the Wi-Fi
function) on the air circulator and can be used
the same way.
The remote control includes 1 x CR2032
3V Lithium battery. This Lithium battery is
protected by an isolating slip. Before first
using the remote control, remove the battery
isolating slip by pulling the slip outwards away
from the remote control.
To check and/or to replace the battery, open
up the battery compartment at the back of the
remote by forming a good grip of the remote,
pushing the small arched groove to the right
and simultaneously pushing out the battery
compartment cover by pushing the rectangular
groove outwards (Fig 1a). Insert the battery
paying attention to the polarity (+ and -).
Fig 1a
Reinsert the battery compartment into the
remote control ensuring that the + symbol
is facing upwards when inserted (Fig 1b).
Make sure the battery compartment is
correctly secured.
14
Fig 1b
n
NOTE:
To use the remote control, it must be pointed at
the control panel and must be used within five
meters of the unit.
w
WARNING
KEEP BATTERIES OUT OF REACH
OF CHILDREN
Swallowing may lead to serious injury in as
little as 2 hours or death, due to chemical burns
and potential perforation of the oesophagus.
If you suspect your child has swallowed or
inserted a button battery immediately call the
24-hour Poisons Information Centre on 13 11
26 for fast, expert advice. Examine devices
and make sure the battery compartment is
correctly secured, e.g. that the screw or other
mechanical fastener is tightened. Do not use if
compartment is not secure.
Dispose of used button batteries immediately
and safely. Flat batteries can still be dangerous.
Tell others about the risk associated with
button batteries and how to keep their
children safe.
Wi-Fi
Connectivity
The AirDynamic 3D™ Connect air circulator
can offer remote operation by using a home
Wi-Fi connection and the Breville Home
Connect™ app downloaded to a compatible
mobile phone through the Google Play store or
Apple App store.
To go straight to the appropriate app store,
Scan the QR code below.
For instructions on how to use the app, scan
the QR code below, refer to the Quick Start
Guide that can be found in the box or go to:
tinyurl.com/HomeConnectQuickStart
n
NOTE
The Breville Home Connect™ app is compatible
with mobile phones running Android® 5.0 or
later and iOS devices 9.0 or later.
n
NOTE
To control the air circulator using the app, the
air circulator must be plugged in to an active
power outlet.
SET UP YOUR AIR CIRCULATOR
1. Ensure the mobile device is connected to a
home Wi-Fi network.
2. The air circulator must be on standby mode.
Once on standby, the symbol will flash
fast on the display panel. The air circulator
is now ready to connect.
3. Log into your Breville Home Connect™ app
account and stay on the "Home" page. To
add the air circulator to the list, touch 'Add
Device' or the symbol found in the top
right-hand corner of the screen. Follow the
prompts in the app.
4. If the connection is successful, the air
circulator will appear in the main page of
the app and the symbol light on the air
circulator will illuminate.
5. If connection is unsuccessful, touch and
hold the button for 5 seconds until the
symbol is flashing slowly. Follow the
prompts in the app to connect in a different
mode.
15