BWT 3 x 3 Installation And Operating Intructions
  1. Manuals
  2. Brands
  3. BWT Manuals
  4. Swimming Pool
  5. 3 x 3
  6. Installation and operating intructions
BWT 3 x 3 Installation And Operating Intructions

BWT 3 x 3 Installation And Operating Intructions

Rectangular wooden pools
Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
Rectangular
wooden pools
Double pine coping
Composite coping
INSTALLATION AND
OPERATING INTRUCTIONS
to be read carefully and kept for future reference
WOODEN POOLS BWT myPOOL
HOTLINE
2019/01 - Indice de révision : A - Code : 97160421
EN | PAGE 1
1/48

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the 3 x 3 and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for BWT 3 x 3

Summary of Contents for BWT 3 x 3

  • Page 1 Double pine coping Composite coping INSTALLATION AND OPERATING INTRUCTIONS to be read carefully and kept for future reference EN | PAGE 1 HOTLINE 1/48 2019/01 - Indice de révision : A - Code : 97160421 WOODEN POOLS BWT myPOOL...

  • Page 2: Table Of Contents

    14.1 Simmers ......................23 14.2 Throughwall flanges ......................24 15. FITTING THE UNDERLAY, LINER & FILLING THE POOL ......24 15.1 The underlay..........................24 15.2 The liner ..........................24 HOTLINE 2/48 2019/01 - Indice de révision : A - Code : 97160421 WOODEN POOLS BWT myPOOL...
  • Page 3 Wooden components: ......................42 21.2 Accessories ...........................42 22. DO NOT PLAY WITH SAFETY ! ! ! ............... 45 23. APPENDICES - EXPLODED VIEWS.............. 46 HOTLINE 3/48 2019/01 - Indice de révision : A - Code : 97160421 WOODEN POOLS BWT myPOOL...

  • Page 4: Wood, A Natural Material

    This is a natural phenomenon that has no impact on the structural integrity of the product. The colour of the whole structure will even out after a few months of exposure.. Splitting and cracking HOTLINE 4/48 2019/01 - Indice de révision : A - Code : 97160421 WOODEN POOLS BWT myPOOL...

  • Page 5: Knots

    It is not a defect, and would not constitute grounds for a guarantee claim.. HOTLINE 5/48 2019/01 - Indice de révision : A - Code : 97160421 WOODEN POOLS BWT myPOOL...

  • Page 6: Foreword

    The kit delivered is intended for installation above-ground. If the pool is to be installed partially or entirely in-ground, additional measures will need to be taken : • If the ground is not level, dig into the slope, never backfill under the pool. • Take care to ensure sufficient drainage adapted to the terrain around the periphery of the concrete HOTLINE 6/48 2019/01 - Indice de révision : A - Code : 97160421 WOODEN POOLS BWT myPOOL...

  • Page 7: Safety

    Pouring the slab: 1 TO 2 DAYS (WITH 2 PEOPLE DEPENDING ON THE MATERIALS USED) Wooden structure and filtration: 2 TO 3 DAYS (WITH 2 PEOPLE - THE TIME INDICATED DOES NOT INCLUDE THE CONCRETE CURING TIME) Curing of the concrete slab before filling the pool with water: 21 DAYS (3 WEEKS) HOTLINE 7/48 2019/01 - Indice de révision : A - Code : 97160421 WOODEN POOLS BWT myPOOL...

  • Page 8: Excavation

    Graviers concassés Dalle béton Drain périphérique Drainage Ensure that there is adequate peripheral drainage, especially if the pool is to be installed in-ground. HOTLINE 8/48 2019/01 - Indice de révision : A - Code : 97160421 WOODEN POOLS BWT myPOOL...

  • Page 9: Dimensions Of The Excavation And Concrete Slab

    Dimensions of the excavation and concrete slab Longueur de la dalle à couler Modèle de bassin Longueur dalle béton en mm Largeur Dalle béton en mm 3 x 3 4100 4100 3 x 6 7100 4100 4 x 8 9100...

  • Page 10: Assembly Of The Metallic Structure

    Around the base, the outer holes are used (Figure 4) while the inner holes are used on bars around the top of the structure (Figure HOTLINE 10/48 2019/01 - Indice de révision : A - Code : 97160421 WOODEN POOLS BWT myPOOL...
  • Page 11 Figure 7 – Detail of the jack Take particular care during this stage of the assembly, it will impact subsequent phases and determine the quality of the pool finish. HOTLINE 11/48 2019/01 - Indice de révision : A - Code : 97160421 WOODEN POOLS BWT myPOOL...

  • Page 12: The Metallic Structure

    At the bottom corners, these flat bars are joined together by an AR type jack (Detail Figure Table detailing the layout of the flat bars along the pool length and width for the various pool models. Pool model Diagonal in mm Layout of the flat bars Layout of the flat bars along each length along each width 3 x 3 4282 B / B B / B 3 x 6 6748 B / B / B / B B / B 4 x 8...

  • Page 13: Pouring The Concrete Slab

    Figure 9 – Position of the metallic posts Figure 10 – Trimming around the posts Figure 11 – Detail of the metallic posts HOTLINE 13/48 2019/01 - Indice de révision : A - Code : 97160421 WOODEN POOLS BWT myPOOL...

  • Page 14: Assembling The Walls

    Your pool comprises several types of wooden slat, the position of the various types of slat are indicated in the exploded views. Please note that the 3 x 3 model is fitted with one skimmer and one return fitting Pool model Layout of the flat bars along each Layout of the flat bars along each width length 3 x 3 1700 + 1700 1700 + 1700 3 x 6 1700 + 1570 + 1570 + 1700 1700 + 1700 4 x 8...
  • Page 15 10 Female half slat 11 Male half slat Figure 14 – Layout of the slats by type - ODYSSEA model - 8 x 4 HOTLINE 15/48 2019/01 - Indice de révision : A - Code : 97160421 WOODEN POOLS BWT myPOOL...

  • Page 16: The Walls (Contd) & Dressing The Posts

    (supplied). Be careful to ensure that each row of slats is fully engaged before starting with the next. HOTLINE 16/48 2019/01 - Indice de révision : A - Code : 97160421 WOODEN POOLS BWT myPOOL...
  • Page 17 (Figure 21). Eliminate any splinters raised by screwing. Should it be necessary to trim the profiles to size (for example, if the pool is partially in-ground) orient the cut surface facing upwards. The 2 profiles do not meet, the metallic post remains visible. 5x100 Figure 19 – Fastening the slat to the posts HOTLINE 17/48 2019/01 - Indice de révision : A - Code : 97160421 WOODEN POOLS BWT myPOOL...

  • Page 18: Mounting The Coping Support Brackets

    PBefore screwing the plates into position, lightly mill the central holes through which the screws (5x40) will be inserted. bassin 5x10 Figure 20 – pool 5 x 10 4x40 5x100 Figure 21 – Coping support brackets HOTLINE 18/48 2019/01 - Indice de révision : A - Code : 97160421 WOODEN POOLS BWT myPOOL...
  • Page 19 Bassin largeur 3m 1 skimmer Bassin largeur 3m Bassin largeur 4m bassin 3x6 Skimmer Skimmer Skimmer Skimmer Skimmer Figure 22 – skimmer positions HOTLINE 19/48 2019/01 - Indice de révision : A - Code : 97160421 WOODEN POOLS BWT myPOOL...

  • Page 20: Installing The Metal Fittings

    In each corner, mount a wooden triangle to support the liner locking track corner elements. (stainless steel screw 5x40 bag C). Figure 26 – Wooden triangle HOTLINE 20/48 2019/01 - Indice de révision : A - Code : 97160421 WOODEN POOLS BWT myPOOL...

  • Page 21: Mounting The Liner Locking Track

    Cut the length to size between two liner locking junctions then bend the track to allow the junction pins to fit into place Figure 29 – Locking track junction HOTLINE 21/48 2019/01 - Indice de révision : A - Code : 97160421 WOODEN POOLS BWT myPOOL...

  • Page 22: Wall Finishings

    (roll enclosed in the liner/ waterproofing kit), make sure that screw heads are covered. Figure 31 – Adhesive strip INSTALLATION OF THE POOL FITTINGS When fastening pool fittings in position, avoid overtightening the screws as this could crack the fitting. Hand tighten by preference Make sure that the gaskets are correctly positioned and applied. It will be difficult to correct mistakes made after the liner is fitted. HOTLINE 22/48 2019/01 - Indice de révision : A - Code : 97160421 WOODEN POOLS BWT myPOOL...

  • Page 23: Simmers

    Figure 34 – fasten the skimmer in position Hold it in place with the pozi countersunk head (TFZ) screws M5x16 + nuts and washers. Figure 35 – 1st self adhesive flange Stick the first self-adhesive gasket (Pool Fitting skinpack) to the front of the skimmer. Take care to ensure that the holes line up correctly. HOTLINE 23/48 2019/01 - Indice de révision : A - Code : 97160421 WOODEN POOLS BWT myPOOL...

  • Page 24: Throughwall Flanges

    Put the liner pack in the pool (caution: it is heavy!). Take the liner out and unfold it once across the pool and then totally along the length of the pool. Before proceeding with the fitting itself, allow the liner to rest for a while so that it becomes more supple, this will facilitate its installation. HOTLINE 24/48 2019/01 - Indice de révision : A - Code : 97160421 WOODEN POOLS BWT myPOOL...

  • Page 25: The Filtration Group

    Do not hesitate to call in a professional to guarantee the compliance of your installation. HOTLINE 25/48 2019/01 - Indice de révision : A - Code : 97160421 WOODEN POOLS BWT myPOOL...

  • Page 26: 16.1.1 Precautions And Advice

    Pump base Skimmer flange face plate Lid clamping ring Skimmer body Lid o-ring Flow regulator with screw Diffuser Skimmer union Tank Return line isolating module (valve) HOTLINE 26/48 2019/01 - Indice de révision : A - Code : 97160421 WOODEN POOLS BWT myPOOL...

  • Page 27: Mounting The Rigid Descending Pipes

    When mounting the rigid descending pipes, the lower section can be oriented to facilitate subsequent assembly of pipes. Wrap Teflon 4 or 5 times around the elbows of the rigid descending fittings C (return fittings), screw them onto the exterior outlets of the nozzles, do not forget to use the o-rings provided in the pool fittings skin pack. Tighten by hand to avoid crushing the o-ring. HOTLINE 27/48 2019/01 - Indice de révision : A - Code : 97160421 WOODEN POOLS BWT myPOOL...
  • Page 28 Check that the tube is inserted fully then tighten the green barrel union taking care to ensure that the connection is leaktight. Screw the rigid descending fittings C onto the return fitting nozzle elbows. Do not forget to check that the o-ring is in position. Cut the rigid descending pipe under the vacuum fitting, (as indicated above and depending on pool height) and install it HOTLINE 28/48 2019/01 - Indice de révision : A - Code : 97160421 WOODEN POOLS BWT myPOOL...

  • Page 29: Assembly Of The Filter

    Hose tail, 45 mm Return Tapped sleeve 1’’1/2 x male, solvent, 50 mm. The sand should reach 2/3 of the way up the filter. HOTLINE 29/48 2019/01 - Indice de révision : A - Code : 97160421 WOODEN POOLS BWT myPOOL...
  • Page 30 It is normal for a small amount of water to flow from the waste port in filtration mode. Cut the rigid descending pipe on the vacuum point according to the height of your pool and mount it. HOTLINE 30/48 2019/01 - Indice de révision : A - Code : 97160421 WOODEN POOLS BWT myPOOL...

  • Page 31: Collector And Pump/ Filter Module

    Collector and pump/ filter module Use silicon grease or soapy water to facilitate fitting of the pipes. waste return CAUtION: 3 ports for the One single port ODYSSEA for the 3 x 3 models and 3 ports if model skimmer 1 vacuum point skimmer 2 Figure 45 – Collector & pump/ filter module Before connecting the pipes, make sure that the protective rubber bands intended to cover the Torro clamps after tightening are in position.
  • Page 32 WEVA aspiration refoulement NOTE: The 3 x 3 pool model is fitted with only one skimmer and one return fitting, therefore the pump outlet manifold only has one port. Hence, there is no Y union installed on the return pipe...

  • Page 33: Filling The Water Circuit

    Figure 50 – Mount the flange Mark the holes for the screws. Apply the second flange. Screw into position (pozi countersunk head screws TFZ M5x16 from the Pool Fitting skin). Tighten screws alternately and moderately by hand. Proceed in the same way to fit the skimmer flanges. Figure 52 – Mount the second flange Figure 51 – Apply the gasket to the flange Next, using a Stanley knife, cut the liner inside the flanges. HOTLINE 33/48 2019/01 - Indice de révision : A - Code : 97160421 WOODEN POOLS BWT myPOOL...

  • Page 34: The Underwater Light (Odyssea Model)

    Model 3X6 Coping model Length, mm 1570 A’ 1716 1570 B’ 1716 1500 1000 1999 Figure 55 – Coping - Weva 3 x 5 HOTLINE 34/48 2019/01 - Indice de révision : A - Code : 97160421 WOODEN POOLS BWT myPOOL...

  • Page 35: Installation Of The Composite Coping - Odyssea

    The length of the coping modules is listed in the above. Pool model Position Layout of the coping module Layout of the coping module along each length along each width 3 x 3 Interior A + B A + B Exterior A’ + B’ A’ + B’...
  • Page 36 Screw the coping onto the corner brackets, posts and support bracket plates using screws from the bag G inserted through the centre of the slots. Pre-drill before inserting the screws. Use the wood drill bit provided (bag J). All the pools are fitted with junction trims to finish the coping. The trims clip over the joins between the coping modules. Bend the trim gently and fit it into position. HOTLINE 36/48 2019/01 - Indice de révision : A - Code : 97160421 WOODEN POOLS BWT myPOOL...

  • Page 37: Ladders

    The fastening mechanism may differ from that illustrated but will function according to the same principle. Figure 63 – Levier Figure 64 – échelle HOTLINE 37/48 2019/01 - Indice de révision : A - Code : 97160421 WOODEN POOLS BWT myPOOL...

  • Page 38: Commissioning And Operating Recommendations

    Length of the filtration cycle The length of the filtration cycle depends on the theoretical time taken for all the water in the pool to pass through the filter. For private pools, the max time allowed for all the water to be recycled is 8 hours. We recommend the following as a function of water temperature: • Below 14°C : 5 to 6 hours per day. HOTLINE 38/48 2019/01 - Indice de révision : A - Code : 97160421 WOODEN POOLS BWT myPOOL...

  • Page 39: Cleaning The Pre-Filter & Filter Backwash

    Switch the pump on for 20 to 30 seconds, to remove impurities and settle the sand. • Stop the pump. • Turn the 6-way valve to FILTRATION • Switch the pump on. After a backwash, the pressure in the filter should drop back down to the nominal pressure. HOTLINE 39/48 2019/01 - Indice de révision : A - Code : 97160421 WOODEN POOLS BWT myPOOL...

  • Page 40: Dechlorinator (Odyssea Model)

    48 hours, this could result in deformation of the structure. Failure to abide by maintenance instructions may entail serious risks to health and safety, notably of children. HOTLINE 40/48 2019/01 - Indice de révision : A - Code : 97160421 WOODEN POOLS BWT myPOOL...

  • Page 41: Winterizing The Pool

    Damaged elements or assemblies must be replaced as quickly as possible. • Only use parts approved by our after sales service. During the pool season, the filter should be run every day for long enough to allow the entire pool water volume to pass through the filter at least three times every 24 hours. HOTLINE 41/48 2019/01 - Indice de révision : A - Code : 97160421 WOODEN POOLS BWT myPOOL...

  • Page 42: Hygiene

    This guarantee does not cover corrosion that may occur over time, nor does it cover damage caused by inappropriate handling during assembly or use of accessories (impacts, scratches, etc) or incidents HOTLINE 42/48 2019/01 - Indice de révision : A - Code : 97160421 WOODEN POOLS BWT myPOOL...
  • Page 43 Damage caused by direct contact with incompatible materials such as bitumen, tar, oils, polystyrene panels, polyurethane. Never apply adhesive tape or glue to the membrane. Tears that occur while fitting the liner caused by shifting the liner without releasing it from the liner locking track first. HOTLINE 43/48 2019/01 - Indice de révision : A - Code : 97160421 WOODEN POOLS BWT myPOOL...
  • Page 44 TIP ! While the cover is not deployed over the surface of the pool, it should be dried and stored away from direct sunlight. HOTLINE 44/48 2019/01 - Indice de révision : A - Code : 97160421 WOODEN POOLS BWT myPOOL...

  • Page 45: Do Not Play With Safety

    Get the child out of the water as quickly as possible. • Call for help immediately and follow the advice given. • Remove the wet clothes and wrap the child in warm blankets. HOTLINE 45/48 2019/01 - Indice de révision : A - Code : 97160421 WOODEN POOLS BWT myPOOL...

  • Page 46: Appendices - Exploded Views

    APPENDICES - EXPLODED VIEWS Exploded view, 3 x 3 pool WEVA Height 1.20 Figure 65 – exploded view, 3 x 3 model- WEVA Height 1.20 Exploded view 3 x 6 pool WEVA Height 1.33 Figure 66 – exploded view 3 x 6 model - WEVA Height 1.33...
  • Page 47 Figure 67 – exploded view 8 x 4 model - ODYSSSEA Height 1.46 HOTLINE 47/48 2019/01 - Indice de révision : A - Code : 97160421 WOODEN POOLS BWT myPOOL...
  • Page 48 Serial number HOTLINE 48/48 2019/01 - Indice de révision : A - Code : 97160421 WOODEN POOLS BWT myPOOL...

This manual is also suitable for:

3 x 64 x 8

Table of Contents