Attaching The Arm/Base - Asus Republic Of Gamers ROG Swift PG32UQX Manual

2.1

Attaching the arm/base

To assemble the monitor base:
1. Insert the base into the arm (Figure 1).
2. Fix the base to the arm by fastening the bundled screw. (Figure 2).
3. Remove the rubber cap at the bottom of the base. (Figure 2).
4. Attach the LED projection cover to the stand. (Figure 3).
(Figure 3)
To change the film on the LED projection cover, follow the illustration below.
ASUS PG32UQX Series LCD Monitor
(Figure 1)
(Figure 2)
1
1
3
2
2
2-1