HALE MC50 Operation Manual page 8

INSTRUMENTS
1. WET or DRY foam selector
2. FoamLogix display and control
3. CAFS or Foam selector
4. Hours run counter
5. Air dump valve
6. Air pressure gauge
7. Wet or Dry foam indicator
ENGINE CONTROLS
8. High compressor oil temperature
9. Engine choke control
10. Starter switch
11. Ignition switch
12. Low engine oil pressure
13. Fuel shut-off
14. Fuse
15. Back-up Starting
16. Charging socket
17. Water supply filter
Rapid relief of compressor
pressure to aid cold starting
Gradually return the choke when engine is
running smoothly
Press top to switch on ignition,
press bottom to switch off
Red light
Turn Anti-clockwise to open
©Hale Products Europe. Our policy is one of continuous development. We therefore
reserve the right to amend specifications without notice or obligation.
MiniCAFS 2.1A Operating Manual
GP/211/05 Issue 2. April 2005
COMMENTS
Press top to make foam wetter
Press bottom to make foam dryer
See page 16 for details
Press top for CAFS, press bottom for foam
only
Records total number of hours engine has
been running
Indicates air injection pressure
Indicates wet or dry composition of foam
Red light
Pull out fully when starting engine from cold
Press in to start engine
10 amp fuse
Recoil starter device
For battery charging only. A fuse (item 14) is
included to prevent its use for jump starting
Remove filter for cleaning
8