Xstrahl 150 Operator's Manual page 23

11
Wall/Floor Stand Control Movements
X-Ray tube (vertical movement):
1. Press the vertical movement brake button.
2. Press at least one of the motion enable
3. Release the motion enable button(s) when
4. Release the vertical movement brake button
Tube stand (longitudinal movement):
1. Press the longitudinal movement brake
2. Press at least one of the motion enable
3. Release the motion enable buttons when the
4. Release the longitudinal movement brake
Tube stand (lateral movement):
1. Press the lateral movement brake button. The
2. Press at least one of the motion enable
3. Release the motion enable button when the
4. Release the lateral movement brake button to
Mains On Indicator Light
Illuminates blue to indicate Mains On power
See Brake/
Motion Enable Buttons
Movement Enables movement
Illustration
See Brake/
Axial Rotation Adjustment (Wheel)
Movement Axial rotation adjustment on the horizontal arm
Illustration controls the axial rotation of the tube head.
1. Release the axial rotation clamp break
2. Turn the rotational wheel to adjust the tube
3. Release axial rotation clamp brake to lock
See Brake/
Vernier Adjustment (Wheel)
Movement There is a rotational wheel on the horizontal arm
Illustration which allows the vertical height to be adjusted. The
150_OPMAN_GB Version 10 © Xstrahl Ltd. All Rights Reserved
The button will illuminate to confirm your
selection.
buttons to move the X-Ray tube vertically.
the required height is achieved.
to lock.
button. The button illuminates to confirm
your selection.
buttons to move the X-Ray tube
longitudinally.
required longitudinal position is reached.
button to lock.
button illuminates to confirm your selection.
buttons to move the X-Ray tube laterally.
desired position is reached. The range of
movement is 200 mm for the floor stand.
lock.
head