Oemtools 27069 Operating Instructions And Parts Manual

Operating Instructions and Parts Manual
Please read and save these instructions. Read through this owner's manual carefully before using product. Protect yourself
and others by observing all safety information, warnings, and cautions. Failure to comply with instructions could result in
personal injury and/or damage to product or property. Please retain instructions for future reference.
FOR CUSTOMER SERVICE
Technical Question?
CALL 1-866-458-2472
customerservice@oem-tools.com
Unpacking
After unpacking unit, inspect carefully for any damage that
may have occurred during transit. Check for loose, missing, or
damaged parts. If any damage is observed, a shipping damage
claim must be filed with carrier. DO NOT use the OEMTOOLS
Cooling System Pressure Test Pump if broken, bent, cracked or
damaged parts (including labels) are noted. Any Cooling System
Pressure Test Pump that appears damaged in any way, operates
abnormally or is missing parts should be removed from service
immediately. If you suspect that the Cooling System Pressure
Test Pump was subjected to shock load (a load that was dropped
suddenly, unexpectedly, etc.) immediately discontinue use until it
has been checked by a factory authorized service center.
WARNING
The following safety information is provided as a guideline to help you operate your Cooling System Pressure Test Pump under the safest
possible conditions. Any tool or piece of equipment can be potentially dangerous to use when safety or safe handling instructions are not
known or not followed. The following safety instructions are to provide the user with the information necessary for safe use and operation.
Please read and retain these instructions for the continued safe use of your tool. Failure to follow instructions listed below may result in
serious injury. In addition, make certain that anyone who uses the equipment understands and follows these safety instructions as well.
Explanation of Safety Signal Words
WARNING: Indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury.
CAUTION: Indicates a potentially hazardous situation which, if not avoided, may result in minor or moderate injury.
CAUTION: Used without the safety alert symbol indicates a potentially hazardous situation which, if not avoided, may
result in property damage.
NOTES: Provide clarity and helpful information.
Thank you very much for choosing an OEMTOOLS
For future reference, please register your new tool at www.oem-tools.com and complete the owner's record below:
Model: _______________ Purchase Date: ___________
Save the receipt, warranty and these instructions. It is important that you read the entire manual to become familiar with this product
before you begin using it. This product is designed for certain applications only. OEMTOOLS
from modification. We strongly recommend this product is not modified and/or used for any application other than that for which it was
designed. If you have any questions relative to a particular application, DO NOT use the product until you have first contacted customer
service to determine if it can or should be performed on the product.
WARNING: Pursuant to California Proposition 65, this product contains chemicals known to the state of California to cause
cancer and birth defects or other reproductive harm. Wash hands after handling.
11/16
2016 OEMTOOLS
®
®
Product!
®
COOLING SYSTEM
PRESSURE TEST PUMP
cannot be responsible for issues arising
®
27069