Coupling Your Trailer - Husky 31318 Assembly, Installation, Operation And Maintenance Instructions

Coupling Your Trailer

1. Ensure the 5th Wheel Trailer wheels are blocked front & rear & that the rear stabilizer jacks are fully retracted.
2. Also make sure the 5
3. Pull handle fully out, then while pulling it to the rear of the truck let it slide back in until it catches on the latch.
4. Check Orange indicator is not obscured by Lock Hasp. This shows the Hitch is unlocked.
5. With hitch head level, set trailer king pin box ½" to 1" below hitch so trailer will ride up and onto hitch. Back Up
the truck under the trailer so the king pin enters the hitch.
6. When the king pin is correctly seated in the hitch it will trip the latch. This will allow the jaw to close. The handle
will then move to the closed position and cover the indicator.
All Products limited to Vehicle Tow Rating, see Vehicle Owners Manual. Visit www.huskytow.com for Warranty
Information / Tech Support. ©2013 The Coast Distribution System, Inc. All Rights Reserved. December 11, 2013-Rev2
th
Wheel Trailer landing leg feet are on a stable surface.
lock hasp indicator lock hasp indicator
showing jaw open showing jaw open
10 of 19