Advertisement
WORKFORCE WI-FI DONGLE USER GUIDE - ENGLISH
PACKING LIST
• 1 x WorkForce Wi-Fi Dongle
• 1 x Type-C adapter
Note: The dongle support starts from WorkForce firmware v. 65.145.0.220.
SAFETY INFORMATION
https://www.wildix.com/safety-information/
WI-FI DONGLE CONNECTION
1. Connect WorkForce Wi-Fi Dongle to Type-C adapter
2. Plug the Wi-Fi Dongle into WorkForce USB Type-C port
3. The Wi-Fi Dongle connection LED indicator turns steady
blue when connected
Notes:
• Wi-Fi Bridge mode is not supported
• WorkForce with a connected dongle requires
at least 5V 2A power source
NETWORK CONNECTION
To connect WorkForce to a Wi-Fi network:
1. Press Menu soft key on WorkForce
2. Go to Network menu and select WLAN option
3. Enable Wi-Fi connection: use Navigation keys or press Switch soft key to change Wi-Fi
connection status from Disable to Enable; press Save soft key
4. Searching for Wi-Fi Networks is in progress. After it is completed, there is a list of all available
networks
5. Select a Wi-Fi network from the list and press Connect soft key
6. Enter password and press Save soft key
7. WorkForce is now connected to the Wi-Fi network
Version 11/2020
Full guide online:
www.wildix.com
Page
1
of
1
Advertisement
Table of Contents
Summary of Contents for Wildix WORKFORCE WI-FI DONGLE
- Page 1 Note: The dongle support starts from WorkForce firmware v. 65.145.0.220. SAFETY INFORMATION https://www.wildix.com/safety-information/ WI-FI DONGLE CONNECTION 1. Connect WorkForce Wi-Fi Dongle to Type-C adapter 2. Plug the Wi-Fi Dongle into WorkForce USB Type-C port 3. The Wi-Fi Dongle connection LED indicator turns steady blue when connected Notes: •...
Need help?
Do you have a question about the WORKFORCE WI-FI DONGLE and is the answer not in the manual?
Questions and answers