Page 1
Z600 Series Conventional Detector Installation Sheet Description Figures Z600 Series Conventional Detector models are shown in Figure 1: Position of the locking tab Table 1. Figure 2: Removing a locked detector Table 1: Models Number Description EN 54 temperature Installation classification Class A (58ºC)
Page 2
Rotate the detector clockwise until it clicks into position. Environmental Application Indoor use The detector may be locked into the mounting base if −20 to 15ºC above temp rating Temperature range required. To do this, remove the locking tab (Figure 1) Relative humidity 20 to 95%, noncondensing before installation.