Enter Suspend Mode; Exit Suspend Mode; Automatic Suspend And Power Off; Enter Audio Settings Menu - Orcam Manual

Enter Suspend mode.

1. Press the power button once.
2. You will hear a beep and, "Suspending. Press again to shut down", and
then, "Suspending" as the device enters Suspend mode.

Exit Suspend mode.

1. Press the power button when the device is detached from the frame, or
double tap the
touch bar while the device is attached to the frame in a horizontal position.
2. You will hear a beep and, "Waking up. Battery is [xx] percent charged".

Automatic Suspend and Power off.

- OrCam MyEye automatically enters Suspend mode after three minutes of
inactivity. This timeframe can be adjusted to a shorter or longer time in the
audio settings menu.
- OrCam MyEye powers itself off after three hours in Suspend mode.
Note:
When left dormant for the set "automatic suspend time", Suspend
mode automatically begins and a small beep is played (no "Suspending"
announcement will be heard), and will wake up when touched accompanied
by a small beep (and not announce, "Waking up").

Enter Audio Settings Menu.

1. Press and hold down the power button.
2. Swipe your finger along the touch bar.
3. Release the power button.
4. OrCam MyEye will announce, "Main menu. Reading rate menu, touch to
select or swipe for other settings".
8.