How To Set The Alarm; How To Start The Stopwatch - Recon 5950 Operation Manual

6. If you want 24 hour settings, once the 12 is flashing, now press the Top Right button to
change to 24 hour time. Once you are done press the Bottom Left button to set it.
How To Start The Alarm (Bluetooth OFF)
1. Press the Bottom Left button 5 times.
2. Press and hold the Bottom Right key for 3 seconds or until you hear a chime
3. Once you hear the chime, press the Top Right button. The 'Alarm' text will be
highlighted and flashing on the watch
4. Then press the Bottom Right button. The hour will be flashing. Press the Top Right
button to adjust the time. The PM will display next to the hour for PM alarm time.
5. Then press the Bottom Right button. The minutes will be flashing. Press the Top Right
button to adjust the minutes.
6. Press the Bottom Left key when done to set the alarm time. You will get an alarm chime
daily for about 7 seconds at your set time.
_________________________________________________________________________________________
How To Start The Stopwatch (Bluetooth OFF)
1. Press the Bottom Left button 6 times.
2. Your screen will default to all zeros, in Stopwatch mode.
3. To begin the stopwatch, press the Top Right button.
4. To stop the stopwatch, press the Top Right button again.
5. To RESUME from paused, press the Top Right button again.
6. To STOP and RESET the stopwatch, press the Bottom Right button.
**If you don't press any buttons after stopping, the screen will default back to the time after
10 seconds.
**If you don't STOP the stopwatch (step 6) and switch to other modes of your watch, the
stopwatch will continue in the background to run. You can access it again by pressing the
Bottom Left button 6 times.
4