SMA NR-PL-DCEMV5-01 Manual page 20

7 Replacing the DST Assembly
7. Remove the connecting screws of the power
modules (TX20).
8. Remove the connecting screws of the DST assembly
(TX20). The assembly will also remain held in place
by the spacers once the screws have been removed.
9. Remove the DST assembly cables from the working area.
10. To remove the assembly from the inverter, first carefully swing the left-hand side of the
assembly out of the inverter and lead the assembly past the connections out of the inverter.
20 STP50-DC-EMV-DST-RM-xx-10
SMA Solar Technology AG
Replacement Manual