Installation & Operation; Notes On Installation - Siemens SIMATIC RTLS4084T Operating Instructions Manual

Installation & operation
4.1

Notes on installation

Note
Before you install the devices, read this section carefully to ensure problem-free installation
and commissioning.
The devices can only be used in conjunction with the RTLS localization system.
Remove the battery pack from the device when you are returning it.
Mount the device so that it has a direct line-of-sight connection to the gateways (360°
panorama view). Any type of material can impact wireless localization. Wireless localization
through metal is not possible. In this case, localization via wireless reflections can occur
which results in inaccurate determination of the location.
Check the device for damages before you use it so that it is not damaged during operation.
Protect the display from objects that could scratch or otherwise damage it. The specified
operating temperature ranges must be observed.
The device contains a lithium battery.
Contact with the battery fluid
Incorrect handling of the device may damage the battery and cause fluid to leak out of the
battery.
Avoid contact with the battery fluid. Rinse skin that comes into contact with battery fluid
with water. If fluid from the battery gets into your eye, seek medical attention.
Fires and burns
Improper handling of batteries can lead result in fires and burns.
SIMATIC RTLS4084T
Operating Instructions, 04/2021, C79000-G8976-C626-02
CAUTION
CAUTION
4
25