Sharp CD-M10000W Operation Manual page 7

! Main speaker
1 2 1
1. Woofer
2. Tweeter
3. Bass Reflex Duct
4. Speaker Terminals
! Woofer
1
1. Woofer
2. Bass Reflex Duct
3. Speaker Terminals
! Placing the speaker system
There is no distinction between the right and the left speakers.
Main speaker (Left)
3
4
Woofer (Left)
Woofer grilles are removable:
Make sure nothing comes into contact with the speaker
diaphragms when you remove the speaker grilles.
Note:
The speaker grilles on the main speakers are not re-
movable.
Caution:
The metallic handles on the both sides of the speaker grill on the woofer are decora-
tions. Do not carry the woofers by them as this may damage the woofers.
Bi-amp system:
This unit employs the bi-amp system in which the low frequency range power ampli-
fier drives woofers, and mid-to-high frequency range power amplifier drives woofers
and tweeters of the main speaker respectively. Clearer sound will be assured by
amplifying two frequency bands individually using two characteristically different
amplifiers.
2
Woofer
3
Tweeter
Woofer
Woofer
01/10/1
Main speaker (Right)
Woofer (Right)
Mid-to-high range
(200 Hz - 20 kHz)
Power amplifier
Pre-amplifier
L-ch
Pre-amplifier
Power amplifier
Ultra-low range
(60 Hz - 200 Hz)
CD-M10000W(X)E1.fm
CD-M10000W
ENGLISH
1
2
3
4
5
6
7
E-6