Hammond Manufacturing 5-350D Series Assembly Instructions

5-350D/5-525D - SERIES
A
2
3
COMPLETE ASSEMBLY
PARTS LIST
ITEM No. DESCRIPTION
1 STEEL CHASSIS
STEEL PANEL
2
3 10-32 X 3/8 SCREWS
4 SCREWS (NOT INCLUDED)
5 WASHERS (NOT INCLUDED)
6 CAGE NUTS (NOT INCLUDED)
COMBINATION RAILS (NOT INCLUDED)
7
TOOL BOX
#2 Phillips Head
Screw Driver
DETAIL B
QTY
1
1
2 OR 4
2 OR 4
2 OR 4
4 OR 8
2
Flat Head Screw
Driver
ASSEMBLY INSTRUCTIONS FOR
STEEL CHASSI S WITH PANEL
7
1
6
B
2
ASSEMBLY INSTRUCTIONS :
A) Select the height at which to mount the steel chassis (item 1) on
the combination rails (item 7).
B) If mounting rails have square cutouts insert 4 or 8 cage nuts (item
6) on the mounting rail to suit the spacing of the mounting slots.
This can be done using a cage nut insertion tool. (Detail B)
C) Line up the mounting slots of the steel chassis (item 1) with the
holes (or cage nuts just inserted) on the combination rail (item 7).
Secure with 10-32 x 3/8 screws (items 3) provided with the chassis.
(Detail A & B)
D) Once the chassis is secure line up the mounting slots on panel with
the holes in the chassis. Secure the panel with screws and washers
(items 4 & 5) purchased for the combination rails. (Detail A).
visit our website @ www.hammondmfg.com
BUL10369
3
DETAIL A
5
4
7
1
HAMMOND
MANUFACTURING
ELECTRONICS GROUP
A
REV.
PAGE 1 OF 1
TM