Advertisement
2.2.2 Adjust the camera angle position
1. VDR-130 main camera
Camera angle can be tilted
up / down as needed
nd
1. EX13-OMIR 2
camera
Camera angle can be tilted
up / down as needed.
Tighten screw to fix angle
2.3 Connecting Power
Use only the supplied car adapter to power up the
camera and charge the built-in battery.
1. Connect one end of the car adapter to the USB
connector of the VDR-130.
USB port input: DC 5V / 1A.
06
2. Plug the other end of the car charger to the cigarette
lighter socket of the vehicle. Once the vehicle engine is
started, the camera automatically turns on. Car charger
input:
Important Note:
1.Use the VDR with the supplied charger only. Do NOT use
other power chargers to avoid damage to camera or battery.
2. Do NOT modify the power cable or connection method as
outlined in this manual. Altering the power cable will void all
warranty.
Note: On certain vehicles, the cigarette lighters are
constantly ON (Hot) so the VDR recording will continue
even when the vehicle is powered off. If this happens,
please manually turn off the camera or remove the car
adapter from the cigarette lighter to prevent battery drain
07
Advertisement
