Model : ATZ HDMI-14TW Description: HDMI 1x4 TV wall, AV/VGA/HDMI/USB Input, TCP/IP RS232 IR Control 1. Introduction The 1 by 4 HDMI TV Wall support CVBS/VGA/HDMI/USB play input sources to be freely arranged on 4 displays. The embedded scaler converts signals from the input sources to match the native resolution of monitors, flat .
Model : ATZ HDMI-14TW Description: HDMI 1x4 TV wall, AV/VGA/HDMI/USB Input, TCP/IP RS232 IR Control 4. Specification Video Bandwidth: 225MHz/6.75Gbps Input ports: 1x HDMI (Female type), 1xUSB, 1xVGA, 1xCVBS+L/R Output ports: 5 x HDMI (Female type) ,1xCoaxial, 2xL/R HDMI Cable Distance: 15M/8-bit 1080p...
Page 4
Model : ATZ HDMI-14TW Description: HDMI 1x4 TV wall, AV/VGA/HDMI/USB Input, TCP/IP RS232 IR Control 5.2 Rear panel 1) Control part TCP/IP: This port is the link for TCP/IP controls, connect to an active Ethernet link with an RJ45 terminated cable.
Model : ATZ HDMI-14TW Description: HDMI 1x4 TV wall, AV/VGA/HDMI/USB Input, TCP/IP RS232 IR Control Remote Control ① Press this button to power on the TV Wall or set it to standby mode. ② Press this button for rotate 90 screen, only for 1x2, 1x3,1x4 TV Wall mode.
Model : ATZ HDMI-14TW Description: HDMI 1x4 TV wall, AV/VGA/HDMI/USB Input, TCP/IP RS232 IR Control TV Wall controller user guide Installation: The TV Wall controller is a green software. Just copy TVWallController.exe to PC which is used to control the TV Wall by RS232 COM port or TCP/IP to complete installation.
Model : ATZ HDMI-14TW Description: HDMI 1x4 TV wall, AV/VGA/HDMI/USB Input, TCP/IP RS232 IR Control “General” page 1. Select RS232 COM or TCP mode. 2. Select RS232 COM port. 3. Click to connect or disconnect PC with TV Wall. 4. Select TV Wall IP.
Model : ATZ HDMI-14TW Description: HDMI 1x4 TV wall, AV/VGA/HDMI/USB Input, TCP/IP RS232 IR Control “Mode” page 1. TV Wall Mode selection. 2. TV Wall Picture Bezel correction adjustment. pg. 11 All specifications are subject to change without prior notice.
Page 12
Model : ATZ HDMI-14TW Description: HDMI 1x4 TV wall, AV/VGA/HDMI/USB Input, TCP/IP RS232 IR Control Figure 1 and Figure 2 will show you the difference between the original image and the image adjusted. Figure 1 The Original Image Figure 2 The Image Adjusted pg.
Model : ATZ HDMI-14TW Description: HDMI 1x4 TV wall, AV/VGA/HDMI/USB Input, TCP/IP RS232 IR Control “Setup” page 1. Input sources selection. 2. Output resolution selection. 3. Output mode selection. 4. Audio out volume adjustment. pg. 13 All specifications are subject to change without prior notice.
Model : ATZ HDMI-14TW Description: HDMI 1x4 TV wall, AV/VGA/HDMI/USB Input, TCP/IP RS232 IR Control “Upgrade” page The TV wall have two mcu (main and sub)can be upgraded. 1. Main mcu upgrade: Click to open FW file(file extension is “.bin”).
Need help?
Do you have a question about the HDMI-14TW and is the answer not in the manual?
Questions and answers