Connecting With Television Using 3.5Mm Audio Cable - Cambridge SoundWorks OontZ Quick Start Manual

Connecting with Television Using 3.5mm Audio Cable

- Plug one end of the 3.5mm Audio Cable into the Optical/Audio In Connector on the
OontZ Bluetooth Adapter.
- Plug the other end of that 3.5mm Audio Cable into the Headphone or Audio-Out
Connector on your television.
- Make sure both ends of the cable are fully inserted.
-If your TV does not have a Headphone Connector or Audio-Out Connector but does
have Left Right Analog Audio Out you will need a 3.5mm to RCA cable as shown
below.
3.5mm to 3.5mm Audio Cable (included)
OR
3.5mm to RCA audio cable is sold seperately
and is available at:
TheOontZ.com/accessories
AUDIO OUT
- or -
HEADPHONE
OUT
OPTICAL
DIGITAL
AUDIO OUT
R
L
L R
ANALOG
AUDIO OUT
Page 4